1.5 ppm/°C nano-Watt resistorless MOS-only voltage reference
- 1 February 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 99-102
Abstract
This paper presents a MOS-only high power supply rejection (PSRR) voltage reference with a very low temperature coefficient (TC) that consumes only tens of nano-Watt. It is composed by a threshold voltage monitor circuit with no resistors, cascaded with a thermal voltage generator, adequate for fabrication in standard processes. Since the MOS transistors operate in subthreshold and near-threshold regimes the current consumption is very low. The operation of the circuit is analytically described and a design methodology is proposed. Post-layout simulations for a design in a 130 nm CMOS process are presented, resulting a reference voltage around 670 mV with a best case TC of 1.5 ppm/°C for the -40 to +125 °C range and an average TC of 20 ppm/°C over process variations, untrimmed. A very low sensitivity to V DD is achieved, resulting a PSRR lower than -71 dB at 100 Hz and a line sensitivity (LS) lower than 576 ppm/V for a supply range from 1 to 3 V. The area is very small, 0.0084 mm2 including the start-up stage.Keywords
This publication has 8 references indexed in Scilit:
- An ultra-low-power CMOS voltage reference generator based on body bias techniqueMicroelectronics Journal, 2013
- 1.2-V Supply, 100-nW, 1.09-V Bandgap and 0.7-V Supply, 52.5-nW, 0.55-V Subbandgap Reference Circuits for Nanowatt CMOS LSIsIEEE Journal of Solid-State Circuits, 2013
- A Portable 2-Transistor Picowatt Temperature-Compensated Voltage Reference Operating at 0.5 VIEEE Journal of Solid-State Circuits, 2012
- A 2.6 nW, 0.45 V Temperature-Compensated Subthreshold CMOS Voltage ReferenceIEEE Journal of Solid-State Circuits, 2010
- A 2-nW 1.1-V self-biased current reference in CMOS technologyIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2005
- Current Mode, Voltage Mode, or Free Mode? A Few Sage SuggestionsAnalog Integrated Circuits and Signal Processing, 2004
- Accurate analysis of temperature effects in I/SUB c/V/SUB BE/ characteristics with application to bandgap reference sourcesIEEE Journal of Solid-State Circuits, 1980
- A CMOS voltage referenceIEEE Journal of Solid-State Circuits, 1978