Mechanical and Tribological Behaviour of Surface-Graphitised Al-1100 Alloy
Open Access
- 18 April 2024
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 12 (4) , 139
Abstract
This study details the mechanical incorporation of graphite particles into the surface of aluminium (Al-1100) to fabricate surface composites using an electrical resistance heating-assisted pressing method. Initially, the aluminium surface is coated with graphite via solution casting. Incorporation is accomplished by locally heating the graphite–aluminium interface with electrical resistance heating and subsequent mechanical pressure application. The magnitude of softening of the aluminium surface can be regulated by process considerations such as the applied current and heating duration. Microstructural assessment of the aluminium–graphite composite was conducted using SEM, TEM, Raman spectroscopy, and XRD. The surface mechanical properties and reduced Young’s modulus were improved by more than 200% and 150%, respectively. A detailed tribological study was conducted, and the study suggested that the wear resistance and COF improved by more than 50%. The progress in wear resistance and COF is corroborated by the microstructural changes in the matrix suggested by the Raman spectroscopy and XRD results.Keywords
This publication has 52 references indexed in Scilit:
- Tribological Behavior of Solid-State Processed Al-1100/GNP Surface NanocompositesJournal of Materials Engineering and Performance, 2018
- Fabrication characteristics and tribological behavior of Al/SiC/Gr hybrid aluminum matrix composites: A reviewFriction, 2016
- Subjecting a Graphene Monolayer to Tension and CompressionSmall, 2009
- Friction and wear behavior of a centrifugally cast lead-free copper alloy containing graphite particlesMetallurgical and Materials Transactions A, 2001
- Tribological characteristics of aluminum-50 Vol Pct graphite compositeMetallurgical Transactions A, 1993
- Raman spectra of graphite edge planesCarbon, 1988
- Microstructure of fiber and particulate SiC in 6061 Al compositesScripta Metallurgica, 1983
- The UPAL process: a direct method of preparing cast aluminium alloy-graphite particle compositesJournal of Materials Science, 1981
- Production of cast aluminium-graphite particle composites using a pellet methodJournal of Materials Science, 1978
- The delamination theory of wearWear, 1973