Influence of Design and Operation Parameters on Bag-Cleaning Performance of Pulse-Jet Baghouse
- 1 June 1999
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 125 (6) , 583-591
Abstract
In this study, a filter test system with clean new fabric bags was used to measure the pulse pressure and acceleration of the filter bag. Fabric acceleration and pulse pressure were used as an index of bag-cleaning intensity. The jet pump curves, which relate the flow rate through the venturi to the average developed pressure by the venturi, were determined by the similar system. The intersection of the jet pump curve and the bag operating line, which relates the pressure drop to flow rate across the bag during pulse-jet cleaning, is the system operating point that was used to predict the average pulse pressure in the bag during pulse-jet cleaning. Experimental results of this study show that a higher pulse pressure can be achieved without the venturi at the top of the bag for bag materials with low resistance coefficient. For bags with higher resistance coefficients, higher pulse pressure is obtained with a venturi installed at the top of the bag. The predicted pressure values are in good agreement with ...Keywords
This publication has 8 references indexed in Scilit:
- Numerical and Experimental Study of Cleaning Process of a Pulse−Jet Fabric Filtration SystemEnvironmental Science & Technology, 1996
- The Potential of Pulse-Jet Baghouses for Utility Boilers. Part 2: Performance of Pulse-Jet Fabric Filter Pilot PlantsJournal of the Air & Waste Management Association, 1992
- The role of venturis in pulse-jet filtersFiltration + Separation, 1991
- Pulse-driven injectors for fabric dust filters III: comparative performance of model and commercial assembliesFiltration + Separation, 1990
- Fabric cleaning in pulse-jet filtersChemical Engineering and Processing - Process Intensification, 1989
- On the influence of the exit conditions on the entrainment rate in the development region of a free, round, turbulent jetFlow, Turbulence and Combustion, 1983
- Predicting Pressure Loss for Pulse Jet FiltersJournal of the Air Pollution Control Association, 1981
- Optimizing Filtration ParametersJournal of the Air Pollution Control Association, 1974