Start-Up Studies of GLAST-III Spherical Tokamak in the Presence of Poloidal Field
- 5 September 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 47 (10) , 4729-4737
Abstract
GLAST-III (glass spherical tokamak) is a small device having an aspect ratio of two (R/a= 2) with major radius R= 20 cm and minor radius a = 10 cm. Experiments are performed to examine the effect of increasing the poloidal field (PF) produced by poloidal coils as well as to study the effect of the inductance of PF coils on the plasma current formation. To investigate the GLAST-III plasma, several diagnostic tools such as Rogowski coil, loop voltage, photodiode, Optical emission spectroscopy, high-speed camera, and Langmuir probe are used. After optimizing the working pressure, the first experiment is performed using toroidal field coils and central solenoid along with radio frequency (RF) pre-ionization source. A plasma current of 1 kA is achieved for 1.2 ms. In later experiments, the effect of the poloidal magnetic field is also included. It is observed that with increasing the PF, the plasma current increases, attain a maximum value (5 kA) and then after a critical value of the applied poloidal magnetic field, the plasma current starts decreasing. Similarly, with the inclusion of inductor in series with the PF coils, the plasma current value is reduced and its pulse duration is increased. Both optical emission and Langmuir probe diagnostics results show a similar trend of the plasma current.Keywords
Funding Information
- IAEA through CRP on “Utilization of the Network of Small Magnetic Confinement Fusion Devices for Mainstream Fusion Research.”
This publication has 19 references indexed in Scilit:
- Time-resolved measurement of plasma parameters by means of triple probeReview of Scientific Instruments, 2013
- The physics of tokamak start-upPhysics of Plasmas, 2013
- Overview of recent experimental results on MASTNuclear Fusion, 2003
- Spherical torus concept as power plants—the ARIES-ST studyFusion Engineering and Design, 2003
- Exploration of spherical torus physics in the NSTX deviceNuclear Fusion, 2000
- Electrode discharge assisted electron cyclotron wave current startup on the CT-6B tokamakNuclear Fusion, 2000
- Development path of low aspect ratio tokamak power plantsFusion Engineering and Design, 1998
- Low voltage Ohmic and electron cyclotron heating assisted startup in DIII-DNuclear Fusion, 1991
- Features of spherical torus plasmasNuclear Fusion, 1986
- Variational moment solutions to the Grad–Shafranov equationThe Physics of Fluids, 1981