Effects of Zn addition on the drop reliability of Sn–3.5Ag–xZn/Ni(P) solder joints
Authors:
- 1 October 2007
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 22 (10) , 2776-2784
Abstract
Varying amounts of Zn (1, 3, 7 wt%) were added to Sn–3.5Ag solder on the electroless Ni(P)/immersion Au metallization, and solder joint microstructures after reflow and isothermal aging (500 h at 150 °C) were investigated using scanning electron microscopy, energy dispersive x-ray spectroscopy, transmission electron microscopy, and x-ray diffraction, which were subsequently correlated to the microhardness and drop test results. Zinc in the solder affected the solder joint intermetallic compounds profoundly, which improved the drop reliability significantly. The effect of Zn was to nucleate Ni5Zn21and to suppress the formation of Ni3P, Ni3SnP, and Ni3Sn4, which were known to increase the propensity for brittle cracking. Drop test results showed an inverse correlation between the number of drops-to-failure (Nf) and the thickness of Ni3P layer. As the growth of the Ni3P layer was suppressed by Zn, drop reliability increased substantially.Keywords
This publication has 18 references indexed in Scilit:
- Effect of Zn on the intermetallics formation and reliability of Sn-3.5Ag solder on a Cu padJournal of Materials Research, 2007
- Correlation Between Chemical Reaction and Brittle Fracture Found in Electroless Ni(P)/immersion gold–solder InterconnectionJournal of Materials Research, 2005
- Investigation of interfacial microstructure and wetting property of newly developed Sn–Zn–Cu solders with Cu substrateJournal of Alloys and Compounds, 2004
- Ductile-to-brittle transition in Sn–Zn solder joints measured by impact testScripta Materialia, 2004
- Spalling of intermetallic compounds during the reaction between lead-free solders and electroless Ni-P metallizationJournal of Materials Research, 2004
- Solid state interfacial reaction of Sn–37Pb and Sn–3.5Ag solders with Ni–P under bump metallizationActa Materialia, 2004
- Residual stress measurements in electroless plated Ni–P filmsThin Solid Films, 2002
- Influence of P Content in Electroless Plated Ni-P Alloy Film on Interfacial Structures and Strength between Sn-Zn Solder and Plated Au/Ni-P Alloy FilmMATERIALS TRANSACTIONS, 2002
- Electrochemical Investigation on the Effect of Silver Addition on Wettability of Sn-Zn System Lead-free Solder.QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 1999
- Elements of X-Ray DiffractionAmerican Journal of Physics, 1957