Mechanical Strength and Hydration Characteristic of Multiple Common Waste-Blended Cement-Based Materials Cured by Electric-Induced Heating Curing Under Severely Cold Environments
Open Access
Abstract
To address the challenges of concrete construction in polar regions, this study investigates the feasibility of fabricating cement-based materials under severely low temperatures using electric-induced heating curing methods. Cement mortars incorporating fly ash (FA-CM), ground granulated blast furnace slag (GGBS-CM), and metakaolin (MK-CM) were cured at environmental temperatures of −20 °C, −40 °C, and −60 °C. The optimal carbon fiber (CF) contents were determined using the initial electric resistivity to ensure a consistent electric-induced heating curing process. The thermal profiles during curing were monitored, and mechanical strength development was systematically evaluated. Hydration characteristics were elucidated through thermogravimetric analysis (TG), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR) to identify phase compositions and reaction products. Results demonstrate that electric-induced heating effectively mitigates the adverse effect caused by the ultra-low temperature constraints, with distinct differences in the strength performance and hydration kinetics among supplementary cementitious materials. MK-CM exhibited superior early strength development with strength increasing rates above 10% compared to the Ref. specimen, which was attributed to the accelerated pozzolanic reactions. Microstructural analyses further verified the macroscopic strength test results that showed that electric-induced heating curing can effectively promote the performance development even under severely cold environments with a higher hydration degree and refined micro-pore structure. This work proposes a viable strategy for polar construction applications.Keywords
Funding Information
- Natural Science Foundation of Heilongjiang Province (LH2021E008)
This publication has 38 references indexed in Scilit:
- Multi-structural evolution of conductive reactive powder concrete manufactured by enhanced ohmic heating curingCement and Concrete Composites, 2021
- Reaction mechanisms of alkali-activated glass powder-ggbs-CAC compositesCement and Concrete Composites, 2021
- Long-term hydration and microstructure evolution of blended cement containing ground granulated blast furnace slag and waste clay brickCement and Concrete Composites, 2021
- Enhanced effect of carbon nanofibers on heating efficiency of conductive cementitious composites under ohmic heating curingCement and Concrete Composites, 2021
- Self-cleaning performance of nano-TiO2 modified metakaolin-based geopolymersCement and Concrete Composites, 2021
- Accelerated carbonation of reactive MgO and Portland cement blends under flowing CO2 gasCement and Concrete Composites, 2020
- Study of seawater mixed one-part alkali activated GGBFS-fly ashCement and Concrete Composites, 2020
- Carbon nanotubes reinforced reactive powder concreteComposites Part A: Applied Science and Manufacturing, 2018
- Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastesCement and Concrete Research, 2018
- Thermal analysis and microstructure of Portland cement-fly ash-silica fume pastesJournal of Thermal Analysis and Calorimetry, 2009