Fundamental Properties and Clinical Application of 3D-Printed Bioglass Porcelain Fused to Metal Dental Restoration
Open Access
- 13 April 2023
- journal article
- research article
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (8) , 7203
Abstract
The purpose of this study is to evaluate the mechanical properties and clinical fitness of 3D-printed bioglass porcelain fused to metal (PFM) dental crowns. To evaluate the mechanical properties, tensile strength, Vickers microhardness, shear bond strength, and surface roughness tests of the SLM printed Co-Cr alloy was conducted. A right mandibular 1st molar tooth was prepared for a single dental crown (n = 10). For a three-unit metal crown and bridge, the right mandibular first premolar and first molar were prepared. Bioglass porcelain was fired to fabricate PFM dental restorations. A clinical gap was observed and measured during each of the four times porcelain was fired. A statistical analysis was conducted. The SLM technique showed the largest statistically significant tensile strength and a 0.2% yield strength value. The milling technique had the lowest statistically significant compressive strength value. The shear bond strength and surface roughness showed no statistically significant difference between the fabricated method. There was a statistically significant change in marginal discrepancy according to the porcelain firing step. The casting technique showed the greatest statistically significant margin discrepancy value. The SLM method showed better fitness than the traditional casting method and showed better mechanical properties as a dental material.Keywords
This publication has 48 references indexed in Scilit:
- CAD/CAM systems available for the fabrication of crown and bridge restorationsAustralian Dental Journal, 2011
- Shear bond strength of a ceramic to Co-Cr alloysThe Journal of Prosthetic Dentistry, 2008
- Comparison of Bond Strength of a Pressed Ceramic Fused to Metal versus Feldspathic Porcelain Fused to MetalJournal of Prosthodontics, 2005
- Corrosion resistance of cobalt‐chromium and palladium‐silver alloys used in fixed prosthetic restorationsEuropean Journal of Oral Sciences, 2005
- SEM/EDS evaluation of porcelain adherence to gold‐coated cast titaniumJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2003
- Stress-relieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium–aluminum–vanadium copingsDental Materials, 2003
- Nickel, chromium, cobalt dental alloys and allergic reactions: an overviewBiomaterials, 1989
- Creep Rate of Porcelain-bonding Alloys as a Function of TemperatureJournal of Dental Research, 1980
- The strength of metal-ceramic bonds with base metals containing chromium. A preliminary reportBritish Dental Journal, 1972
- The estimation of cement film thickness by an in vivo techniqueBritish Dental Journal, 1971