Preliminary Study on 2 × 2 Parallel REBCO Stacks for 8 kA Current Leads
- 7 February 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Abstract
The integration of high-temperature superconducting (HTS) technology into fusion magnets necessitates advanced cabling solutions. This study presents the design and fabrication of a prototype Stacks-in-Conduit-Conductor (SICC) cable for a current lead. The current lead comprises a 2 × 2 parallel REBCO stacks, each consisting of 30 layered REBCO tapes. Three repeated experiments were conducted in a liquid nitrogen environment, applying a current of 8 kA. Voltage measurements revealed a negative voltage profile in the inter-stack voltages indicating effective current sharing among the REBCO stacks. Similar inter-stack voltage profiles were confirmed through simple circuit analysis. The loss across the REBCO stacks, including contact resistance, was measured to be less than 1 W. However, when a copper block was incorporated, the total loss of the current lead increased to approximately 5.6 W. Further improvements can be achieved by optimizing low-resistance termination joints and the volume of the copper block.Keywords
Funding Information
- National Research Foundation of Korea (RS-2022-NR068576, RS-2022-NR071933)
This publication has 19 references indexed in Scilit:
- Improved cryogenic stability by thermal insulation between forced-flow gas-cooled REBCO conductors in fusion magnetsCryogenics, 2023
- Recent progress in Chinese fusion research based on superconducting tokamak configurationThe Innovation, 2022
- Overview of the SPARC tokamakJournal of Plasma Physics, 2020
- Non-twisted stacks of coated conductors for magnets: Analysis of inductance and AC lossesCryogenics, 2020
- Overview and status of construction of ST40Fusion Engineering and Design, 2017
- Contact resistance between two REBCO tapes under load and load cyclesSuperconductor Science and Technology, 2017
- Pursuing low joint resistivity in Cu-stabilized REBa2Cu3Oδcoated conductor tapes by the ultrasonic weld–solder hybrid methodSuperconductor Science and Technology, 2015
- ARC: A compact, high-field, fusion nuclear science facility and demonstration power plant with demountable magnetsFusion Engineering and Design, 2015
- Calculation of alternating current losses in stacks and coils made of second generation high temperature superconducting tapes for large scale applicationsJournal of Applied Physics, 2013
- HTS twisted stacked-tape cable conductorSuperconductor Science and Technology, 2011