Thermo-Economic Analysis of a Coal-Fired Power Plant (CFPP) Using Turbine Cycle Heat Rate and Plant Net Heat Rates at Various Operating Loads
Open Access
- 3 March 2022
- journal article
- research article
- Published by Universiti Putra Malaysia in Pertanika Journal of Science and Technology
- Vol. 30 (2) , 1003-1018
Abstract
Evaluating Coal-Fired Power Plant (CFPP) performance is a complex process involving the determination of the turbine cycle Heat Rate (TCHR). This study focuses on determining the TCHR by developing a mathematical model. The model, which incorporates economic analysis of the plant, is developed using energy and mass balance relationships of the turbine cycle, validated using plant commissioning data from a 700MWn CFPP located in Perak, Malaysia. Actual plant data from a 700MWn CFPP is utilized to improve the accuracy and increase the confidence of the results of this study. It was found that at the nominal operating load of 729MWg, there is a Heat Rate (HR) deviation of -1,135 kJ/kWh, leading to daily losses of RM240,447 or USD 60,112. Furthermore, it is possible to utilize the developed model at lower loads as the plant is now being used to operate on “cyclic” loads. The daily losses at a lower load of 431MWg are RM125,767 or USD31,442. Thus, the model is able to compare the plant HR at various loads against commissioning data, and economic analysis is able to be carried out effectively. Valuable information for plant operations and performance engineers could be obtained using this model to determine plant HR.Keywords
This publication has 14 references indexed in Scilit:
- Power plant fuel consumption rate during load cyclingApplied Energy, 2018
- An all-condition simulation model of the steam turbine system for a 600 MW generation unitJournal of the Energy Institute, 2018
- A loss method for exergy auditing of steam boilersEnergy, 2017
- Online performance monitoring platform based on the whole process models of subcritical coal-fired power plantsApplied Thermal Engineering, 2017
- Efficiency of a Coal Fired Boiler in a Typical Thermal Power PlantAmerican Journal of Mechanical and Industrial Engineering, 2017
- Summary of energy demand and renewable energy policies in MalaysiaRenewable and Sustainable Energy Reviews, 2016
- Optimization of a Turbine Used in Coal Fired Thermal Power Plants Based on Inlet Steam Temperature Using ThermoeconomicsInternational Journal of Recent advances in Mechanical Engineering, 2015
- Improving the Boiler Efficiency by Optimizing the Combustion AirApplied Mechanics and Materials, 2015
- Thermoeconomic Optimization of a Boiler Used in a Coal Fired Thermal Power Plant Based on Hot Air TemperatureInternational Journal of Recent advances in Mechanical Engineering, 2015
- DCS Technology-Based Design of Electrical Control System for Thermal Power PlantThe Open Electrical & Electronic Engineering Journal, 2014