Two-Step Chemical Mechanical Polishing of 4H-SiC (0001) Wafer
- 1 July 2021
- journal article
- research article
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 10 (7) , 074004
Abstract
Chemical mechanical polishing (CMP), as a widely used global smoothing technique, requires a high polishing rate and a low surface roughness. However, it is difficult to meet these requirements with single-step polishing. To obtain a perfect 4H-SiC wafer surface, we studied a two-step CMP 4H-SiC wafer using a-Al 2 O 3 -based slurry and nano-SiO 2 -based slurry. Before the two-step process was determined, the effect of concentration of KMnO 4 and pH on the polishing rate of 4H-SiC was first studied with Al 2 O 3 as the abrasive, and the maximum polishing rate of 1400 nm h −1 was determined under the condition of pH of 2.00 and KMnO 4 concentration of 6.5 wt% in the step. Furthermore, the effect of H 2 O 2 concentration on the polishing rate of 4H-SiC was investigated using SiO 2 as the abrasive and V 2 O 5 as the catalyst. It was determined that under the condition of V 2 O 5 concentration of 4 wt% and H 2 O 2 concentration of 10 wt%, the maximum polishing rate of the second step polishing was 150 nm h −1 , and a perfect surface was obtained, with a surface roughness of 0.066 nm. In addition, the in situ friction coefficients have used to characterize the two-step process. At the end, the CMP mechanisms of the above two slurry have been deduced and preliminarily demonstrated.Keywords
Funding Information
- Shanghai Sailing Program (19YF1456100)
- Science and Technology Council of Shanghai (17DZ2291300、19JC1416801)
- National Natural Science Foundation of China (61874178、61874129、91964204、61904186、619041)
- National Key Research and Development Program of China (2017YFA0206101)
This publication has 24 references indexed in Scilit:
- Study on 6H-SiC Crystal Substrate (0001) C Surface in FA-CMP Based on Diamond ParticleApplied Mechanics and Materials, 2015
- Chemical mechanical planarization (CMP) of on-axis Si-face SiC wafer using catalyst nanoparticles in slurrySurface and Coatings Technology, 2014
- A Novel Grinding Technique for 4H-SiC Single-Crystal Wafers Using Tribo-Catalytic AbrasivesMaterials Science Forum, 2014
- Characteristics in SiC-CMP using MnO2 slurry with Strong Oxidant under Different Atmospheric ConditionsMRS Proceedings, 2013
- Carrier Diffusivity in Highly Excited Bulk SiC, GaN, and Diamond Crystals by Optical ProbesMaterials Science Forum, 2012
- A chemical mechanical polishing model incorporating both the chemical and mechanical effectsThin Solid Films, 2004
- Material removal mechanism in chemical mechanical polishing: theory and modelingIEEE Transactions on Semiconductor Manufacturing, 2001
- Ionization rates and critical fields in 4H silicon carbideApplied Physics Letters, 1997
- Status of silicon carbide (SiC) as a wide-bandgap semiconductor for high-temperature applications: A reviewSolid-State Electronics, 1996
- Thermal Conductivity of Pure and Impure Silicon, Silicon Carbide, and DiamondJournal of Applied Physics, 1964