Preparation of Foamed Ceramics from Graphite Tailings Using A Self-Foaming Method
Open Access
Abstract
Graphite tailings were used as the raw materials for the preparation of foamed ceramics via a high-temperature self-foaming method. The residual carbon in the tailings acted as the foaming agent and no additional foaming agents were required. The residual carbon reacted with Fe2O3 and produced gas that was wrapped by the liquid phase to form a porous structure. The effects of sintering temperature, holding time, carbon content, flux on the bulk density, water absorption, and mean pore size of the foamed ceramics were investigated. The bulk density, compressive strength, thermal conductivity, and water absorption of the foamed ceramic prepared using the optimal sample D100 (100 wt% graphite tailings) and sintered at 1200 °C for 20 min were 1.36 g/cm3, 0.35%, 12.03 MPa, and 0.51 W/(m·K), respectively. The raw material contained CaO, Fe2O3, and SiO2, which formed augite with a low fusibility point. In contrast, the molten decomposition products of potassium feldspar and CaSiO3 ions formed anorthite, which has a high fusibility point. Therefore, potassium feldspar is not recommended for use as a flux in tailing systems with high calcium content. Foamed ceramics were prepared using up to 100 wt% graphite tailings. This is a new approach for the economical disposal of graphite tailings.Keywords
Funding Information
- National Key R&D Program of China (2020YFC1909601, 2020YFC1909603, 2022CYCX05002, XDA21040600, E2020111205)
- Industrial Technology Innovation Project of Inner Mongolia Academy of Science and Technology (2020YFC1909601, 2020YFC1909603, 2022CYCX05002, XDA21040600, E2020111205)
- Strategic Priority Science and Technology Project of Chinese Academy of Sciences (2020YFC1909601, 2020YFC1909603, 2022CYCX05002, XDA21040600, E2020111205)
- Natural Science Foundation of Hebei Province (2020YFC1909601, 2020YFC1909603, 2022CYCX05002, XDA21040600, E2020111205)
This publication has 29 references indexed in Scilit:
- Effect of silicon carbide particle size and CaO content on foaming properties during firing and microstructure of porcelain ceramicsCeramics International, 2014
- Effects of magnesium oxychloride and silicon carbide additives on the foaming property during firing for porcelain ceramics and their microstructureJournal of the European Ceramic Society, 2012
- Natural graphite tailings as heterogeneous Fenton catalyst for the decolorization of rhodamine BChemical Engineering Journal, 2012
- Effect of thermal activation on the tribological behaviours of serpentine ultrafine powders as an additive in liquid paraffinTribology International, 2011
- Preparation of high strength foam glass–ceramics from waste cathode ray tubeMaterials Letters, 2010
- Improvement of Reactivity of Carbon Iron Ore Composite with Biomass Char for Blast FurnaceISIJ International, 2009
- Reported tailings dam failuresJournal of Hazardous Materials, 2008
- Gelcasting of alumina foams consolidated by epoxy resinJournal of the European Ceramic Society, 2008
- Groundwater pollution due to a tailings damEngineering Geology, 2001
- Oxidation state of iron in silicate glasses and melts: a thermochemical modelChemical Geology, 2001