Effect of Reduction Ratio below Austenite Recrystallization Stop Temperature on Mechanical Properties of an API X70M PSL2 Line Pipe Steel
- 1 October 2019
- journal article
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 23 (5) , 972-981
Abstract
Steel grades having high toughness and high strength are required for line pipes since gas and oil should be transported through them at high pressures. Thermo-mechanically controlled rolling processes are used for increasing both toughness and strength at low temperatures since the line pipes are exposed to harsh climatic conditions at full length and rather severe service conditions. Various test methods such as Charpy, DWTT, CTOA have been used for measurement of toughness values of these steels and the results have been evaluated considering various criteria. In this study, thermo-mechanical rolling trials were performed at the temperature below the recrystallization temperature of austenite on an API X70M PSL2 grade steel, which is large scale used in the oil and natural gas line pipes, to increase the strength without sacrificing the toughness. Different reduction ratios were utilized and the effect of reduction ratios on mechanical properties and microstructures were investigated during the trials. It was observed that final grain size decreased and strength and toughness increased with increasing reduction ratio.Keywords
This publication has 32 references indexed in Scilit:
- Microstructure, mechanical properties and hydrogen induced cracking susceptibility of X80 pipeline steel with reduced Mn contentMaterials Science and Engineering: A, 2013
- Effects of finish rolling temperature on inverse fracture occurring during drop weight tear test of API X80 pipeline steelsMaterials Science and Engineering: A, 2012
- Structuring and deposition of nanoparticles in X70 steel during coiling and subsequent coolingSteel in Translation, 2009
- Correlation of microstructure and charpy impact properties in API X70 and X80 line-pipe steelsMaterials Science and Engineering: A, 2007
- High strength microalloyed CMn(V–Nb–Ti) and CMn(V–Nb) pipeline steels processed through CSP thin-slab technology: Microstructure, precipitation and mechanical propertiesMaterials Science and Engineering: A, 2006
- Influence of controlled rolling condition on microstructure and mechanical properties of low carbon micro-alloyed steelsJournal of Materials Processing Technology, 2004
- Modeling of steel microstructure evolution during thermo-mechanical rolling of plate for conveying pipesJournal of Materials Processing Technology, 2004
- Analysis of abnormal fracture occurring during drop-weight tear test of high-toughness line-pipe steelMaterials Science and Engineering: A, 2004
- Ductile tearing of pipeline-steel wide platesEngineering Fracture Mechanics, 2001
- Ductile tearing of pipeline-steel wide platesEngineering Fracture Mechanics, 2001