Shake Table Test of Full-Size Wooden Houses versus Wall Test Result: Comparison of Load-Deformation Relationship
- 1 October 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 35 (5) , 04021043
Abstract
The design procedure considered in the Japanese code for low-rise timber houses (two or fewer stories), is through a wall volume method. The wall volume method entails calculating the shear capacity of each wall through addition of shear walls. However, past earthquake damages highlighted the vulnerability of light timber structures and warrant detailed evaluations to assess the design practice. In this study, load-deformation ( ) relations of the wall are combined to estimate the story shear drift. The general calculation of the amount of walls as a design method for a house is very simple. Buildings damaged in recent earthquakes have become of a concern to decision makers, owners, and designers. To validate the wall volume method, 21 full-scale shake table tests are compared with static wall test results. From the analytical and experimental studies, the short-term allowable shear strength in design with the full-scale experiment is about 2.25 times the standard method and about 2.0 times the quality verification method. Regarding the relationship, the rigidity and maximum load obtained from the experimental tests are 1.2 and 1.3 times larger than the addition, respectively. This paper has highlighted also influences of nonstructural members on the overall response of the structures.
Keywords
This publication has 20 references indexed in Scilit:
- Experimental and numerical study of OSB sheathed-LVL stud wall with stapled connectionsConstruction and Building Materials, 2020
- Stress distribution among sheathing-to-frame nails of timber shear walls related to different base connections: Experimental tests and numerical modellingConstruction and Building Materials, 2016
- Shake table tests on a full-scale timber-frame building with gypsum fibre boardsEuropean Journal of Wood and Wood Products, 2016
- Tests on timber frame walls under in-plane forces: part 1Proceedings of the Institution of Civil Engineers - Structures and Buildings, 2015
- SEISMIC BEHAVIOR AND CHARACTERISTIC OF WOOD HOUSE WITH BRACING SHEAR WALLJournal of Structural and Construction Engineering (Transactions of AIJ), 2014
- Experimental Seismic Response of a Full-Scale Light-Frame Wood BuildingJournal of Structural Engineering, 2010
- Seismic Testing of Two-Story Woodframe House: Influence of Wall Finish MaterialsJournal of Structural Engineering, 2002
- Seismic Resistance of Wood Shear Walls with Large OSB PanelsJournal of Structural Engineering, 2001
- Observations on the Performance of Structures in the Kobe Earthquake of January 17, 1995PCI Journal, 1995
- Static and dynamic analysis of timber shear wallsCanadian Journal of Civil Engineering, 1990