The working process of an oil‐free claw vacuum pump
Authors:
- A. RaykovARA. Raykov
- S. SalikeevSSS. Salikeev
- A. BurmistrovABA. Burmistrov
- V. AlyayevVAV. Alyayev
- M. FominaMFM. Fomina
- 3 April 2017
- journal article
- research article
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 29 (2) , 45-49
Abstract
Mathematical model of oil free claw vacuum pump is presented. The model is based on energy balance differential equations of thermodynamic system of variable mass working body.Using the equations of coordinates transformation and contact line of rotors continuity condition, equations for geometry of claw pump working chamber on condition of rotors point connection are obtained. To evaluate the leakage through the rotor mechanism channels, their existence graphs are plotted and geometric parameters of the channels depending on rotors position are determined.As a result of modeling, dependence of pressure and temperature in suction and compression‐discharge chambers on rotation angle at different rotary speeds and on different inlet pressures and relationship between pumping speed and inlet pressure are obtained.The comparison between calculated values and experimental data obtained for one‐stage claw pump with identical rotors is carried out. The maximal difference between the calculated and experimental values does not exceed 15 %. The developed mathematical model is recommended for analysis of influence of rotors geometry on the working process parameters and pumping characteristics of an oil free claw pump.Keywords
This publication has 7 references indexed in Scilit:
- An analytical model of claw rotor profiles and working process model with the mixing process for claw vacuum pumpsVacuum, 2015
- Investigation of a novel circular arc claw rotor profile for claw vacuum pumps and its performance analysisVacuum, 2015
- Conductance calculation of channels in laminar gas flow regime at an arbitrary pressure differenceVacuum, 2014
- Non‐contact vacuum pumpsVakuum in Forschung und Praxis, 2014
- A study of the geometric design and gas port of the claw-type rotorProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2009
- Study on the tooth profile for the screw claw-type pumpMechanism and Machine Theory, 2008
- Modeling of a multistage claw rotor vacuum pumpJournal of Vacuum Science & Technology A, 1995