Alexey Raykov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexey Raykov has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
A. Burmistrov
Kazan Natl Res Technol Univ, Dept Vacuum Equipment, Kazan, Russia
6 shared publicationsM. Fomina
Kazan Natl Res Technol Univ, Dept Vacuum Equipment, Kazan, Russia
6 shared publications- Sergey Salikeev
68 Karl Marx Street Kazan 420015 Russia
6 shared publications - Aleksey Burmistrov
Kazan National Research Technological University
3 shared publications - A. A. Isaev
Kazan National Research Technological University, 68. Marx Str., Kazan 420015, Russian Federation
2 shared publications E. Kapustin
Vakuummash, 58 Tulskaya Str., Kazan 420054, Russian Federation
2 shared publications
Latest Publications
- 1 January 2024
- Published by FSB EIHE Omsk State Technical University in Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering
- Vol. 8 (3)
Mathematical modeling non-contact external compression pumps with different molecular weights gases
A distinctive feature of Roots type vacuum pumps is the selective of pumping, which is due to the dependence of reverse flows on the type of gas. To study this phenomenon, a mathematical model of the work process is used, based on solving differential equations of a system with variable mass. Comparisons of the experimental and calculated values of pumping speed and pressure increase for helium, argon and air show a discrepancy of no more than 10 %. Calculations have shown that under viscous flow conditions, switching from pumping argon to helium reduces pumping speed by more than 10 % and pressure increase by 50 %.
- 1 January 2024
- Published by FSB EIHE Omsk State Technical University in Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering
- Vol. 8 (3)
Mathematical modeling non-contact external compression pumps with different molecular weights gases
A distinctive feature of Roots type vacuum pumps is the selective of pumping, which is due to the dependence of reverse flows on the type of gas. To study this phenomenon, a mathematical model of the work process is used, based on solving differential equations of a system with variable mass. Comparisons of the experimental and calculated values of pumping speed and pressure increase for helium, argon and air show a discrepancy of no more than 10 %. Calculations have shown that under viscous flow conditions, switching from pumping argon to helium reduces pumping speed by more than 10 % and pressure increase by 50 %.
- 1 May 2022
- Published by Bauman Moscow State Technical University in Proceedings of Higher Educational Institutions. Маchine Building
- No. 5 (746),p. 52-58
Calculation of the Actual Radial Clearance when Simulating the Working Process of an Oil-Free Volute Vacuum Pump
The volute vacuum pumps provide an oil-free medium vacuum due to low backflows and the guaranteed clearance between the spirals. When developing volute pumps, the minimum radial clearance ensuring contactless movement of the spirals is determined for any normal operating conditions. The article considers a method for calculating the radial clearance of an oil-free volute pump. The gas forces acting on the working elements of the vacuum pump do not change significantly the radial clearance. Since the spirals are made of aluminum alloys, the main effect on the radial clearance change is caused by thermal deformations of the spiral elements. This change can reach up to 25%, and during pump operation the clearance decreases for external cavities and it increases for internal ones. To find the most accurate value of the radial clearance, it is necessary to use the results of measurements of the spiral element profile parts as an initial approximation. Comparison of calculated and experimental indicator diagrams confirmed the adequacy of the proposed methodology.
- 1 May 2022
- Published by Bauman Moscow State Technical University in Proceedings of Higher Educational Institutions. Маchine Building
- No. 5 (746),p. 52-58
Calculation of the Actual Radial Clearance when Simulating the Working Process of an Oil-Free Volute Vacuum Pump
The volute vacuum pumps provide an oil-free medium vacuum due to low backflows and the guaranteed clearance between the spirals. When developing volute pumps, the minimum radial clearance ensuring contactless movement of the spirals is determined for any normal operating conditions. The article considers a method for calculating the radial clearance of an oil-free volute pump. The gas forces acting on the working elements of the vacuum pump do not change significantly the radial clearance. Since the spirals are made of aluminum alloys, the main effect on the radial clearance change is caused by thermal deformations of the spiral elements. This change can reach up to 25%, and during pump operation the clearance decreases for external cavities and it increases for internal ones. To find the most accurate value of the radial clearance, it is necessary to use the results of measurements of the spiral element profile parts as an initial approximation. Comparison of calculated and experimental indicator diagrams confirmed the adequacy of the proposed methodology.
- 1 January 2021
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2412 (1) , 030039
Resistance of roots pump exhaust duct
Flow coefficients of Roots pump exhaust duct were calculated in a wide range of Reynolds numbers with the help of hydraulic gas dynamics numerical methods. Comparison with experimental data verified adequacy of obtained results. Approximation relationship mass flow coefficient vs rotor rotation angle is obtained which can be used for mathematical models of Roots pumps.
- 1 January 2021
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2412 (1) , 030039
Resistance of roots pump exhaust duct
Flow coefficients of Roots pump exhaust duct were calculated in a wide range of Reynolds numbers with the help of hydraulic gas dynamics numerical methods. Comparison with experimental data verified adequacy of obtained results. Approximation relationship mass flow coefficient vs rotor rotation angle is obtained which can be used for mathematical models of Roots pumps.
- Open Access
- 1 September 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1313 (1) , 012008
Development of scroll vacuum pump characteristics by thermal deformations compensation
Influence of thermal deformations of scroll vacuum pumps working elements on clearances in working mechanism is considered. Analysis of influence of a clearance value on indicator diagrams and pumping speed was carried out. It is shown that alteration of a clearance due to thermal deformations decreases pumping speed at low pressures. The design of scroll elements compensating clearances alteration in pump operation and improving pumping characteristics is presented.
- 1 September 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1313 (1) , 012008
Open AccessDevelopment of scroll vacuum pump characteristics by thermal deformations compensation
Influence of thermal deformations of scroll vacuum pumps working elements on clearances in working mechanism is considered. Analysis of influence of a clearance value on indicator diagrams and pumping speed was carried out. It is shown that alteration of a clearance due to thermal deformations decreases pumping speed at low pressures. The design of scroll elements compensating clearances alteration in pump operation and improving pumping characteristics is presented.
- 28 August 2019
- Published by AIP Publishing
- Vol. 2141 (1) , 030024
Calculation of backward flow in channels with moving walls in oil free non-contact vacuum pumps
Procedure of conductance calculation of radial channels formed by moving walls in non-contact pumps and compressors in viscous gas flow regime is developed. Comparison of calculated data and data obtained by numerical solution of gas flow is carried out for inlet pressures from 100 to 105 Pa and wall velocities 5–40 m/s. Formula for approximate conductance calculation of channels with moving walls used as the initial approximation in the presented procedure is obtained for faster calculation.
- 28 August 2019
- Published by AIP Publishing
- Vol. 2141 (1) , 030024
Calculation of backward flow in channels with moving walls in oil free non-contact vacuum pumps
Procedure of conductance calculation of radial channels formed by moving walls in non-contact pumps and compressors in viscous gas flow regime is developed. Comparison of calculated data and data obtained by numerical solution of gas flow is carried out for inlet pressures from 100 to 105 Pa and wall velocities 5–40 m/s. Formula for approximate conductance calculation of channels with moving walls used as the initial approximation in the presented procedure is obtained for faster calculation.
- 1 December 2018
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 30 (6) , 24-27
Scroll Geometry of Scroll Vacuum Pump Influence on pumping characteristics and indicated power
- 1 December 2018
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 30 (6) , 24-27
Scroll Geometry of Scroll Vacuum Pump Influence on pumping characteristics and indicated power
- 6 December 2017
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 29 (6) , 28-31
Mathematical model of working process of oil free scroll vacuum pump
Summary: A mathematical model of oil free scroll machine working in vacuum conditions is considered. Differential equations and main assumptions in the model are presented. Four types of control volumes are specified. The model takes into consideration heat exchange between the pump working elements, change of clearances due to thermal deformations, and mobility of the scroll element wall in calculation of leakage. The comparison of the calculated values of the pumping speed with experimental values obtained at different rotation speed of the driveshaft is carried out.
- 6 December 2017
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 29 (6) , 28-31
Mathematical model of working process of oil free scroll vacuum pump
Summary: A mathematical model of oil free scroll machine working in vacuum conditions is considered. Differential equations and main assumptions in the model are presented. Four types of control volumes are specified. The model takes into consideration heat exchange between the pump working elements, change of clearances due to thermal deformations, and mobility of the scroll element wall in calculation of leakage. The comparison of the calculated values of the pumping speed with experimental values obtained at different rotation speed of the driveshaft is carried out.
- 3 April 2017
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 29 (2) , 45-49
The working process of an oil‐free claw vacuum pump
Mathematical model of oil free claw vacuum pump is presented. The model is based on energy balance differential equations of thermodynamic system of variable mass working body.Using the equations of coordinates transformation and contact line of rotors continuity condition, equations for geometry of claw pump working chamber on condition of rotors point connection are obtained. To evaluate the leakage through the rotor mechanism channels, their existence graphs are plotted and geometric parameters of the channels depending on rotors position are determined.As a result of modeling, dependence of pressure and temperature in suction and compression‐discharge chambers on rotation angle at different rotary speeds and on different inlet pressures and relationship between pumping speed and inlet pressure are obtained.The comparison between calculated values and experimental data obtained for one‐stage claw pump with identical rotors is carried out. The maximal difference between the calculated and experimental values does not exceed 15 %. The developed mathematical model is recommended for analysis of influence of rotors geometry on the working process parameters and pumping characteristics of an oil free claw pump.
- 3 April 2017
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 29 (2) , 45-49
The working process of an oil‐free claw vacuum pump
Mathematical model of oil free claw vacuum pump is presented. The model is based on energy balance differential equations of thermodynamic system of variable mass working body.Using the equations of coordinates transformation and contact line of rotors continuity condition, equations for geometry of claw pump working chamber on condition of rotors point connection are obtained. To evaluate the leakage through the rotor mechanism channels, their existence graphs are plotted and geometric parameters of the channels depending on rotors position are determined.As a result of modeling, dependence of pressure and temperature in suction and compression‐discharge chambers on rotation angle at different rotary speeds and on different inlet pressures and relationship between pumping speed and inlet pressure are obtained.The comparison between calculated values and experimental data obtained for one‐stage claw pump with identical rotors is carried out. The maximal difference between the calculated and experimental values does not exceed 15 %. The developed mathematical model is recommended for analysis of influence of rotors geometry on the working process parameters and pumping characteristics of an oil free claw pump.
- 1 June 2016
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 28 (3) , 43-47
Experimental Study of Oil‐Free Claw Vacuum Pump Characteristics
Experimental study of pumping characteristics of a pilot model of a claw single‐stage vacuum pump with identical rotors was carried out. The curves of pumping speed vs. pressure at different rotary speed and the ultimate pressure at different rotors speed were determined on a test unit. Indicator pressure diagrams in working chambers of claw vacuum pump were obtained with the help of special sensors.Thus, an experimental data bank concerning the pumping characteristics of claw vacuum pump was created. It may be used for estimation of mathematical model adequacy and further development of the pump design.
- 1 June 2016
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 28 (3) , 43-47
Experimental Study of Oil‐Free Claw Vacuum Pump Characteristics
Experimental study of pumping characteristics of a pilot model of a claw single‐stage vacuum pump with identical rotors was carried out. The curves of pumping speed vs. pressure at different rotary speed and the ultimate pressure at different rotors speed were determined on a test unit. Indicator pressure diagrams in working chambers of claw vacuum pump were obtained with the help of special sensors.Thus, an experimental data bank concerning the pumping characteristics of claw vacuum pump was created. It may be used for estimation of mathematical model adequacy and further development of the pump design.
- 12 June 2015
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 27 (3) , 42-46
Deformations of Working Elements in Oil Free Scroll Vacuum Pumps
- 12 June 2015
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 27 (3) , 42-46
Deformations of Working Elements in Oil Free Scroll Vacuum Pumps