PKPavlo Kovalov

Pavlo Kovalov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pavlo Kovalov has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Improving the technology of waxes obtaining from oil and fat waste

    by Dmytro Saveliev, Olena Petrova, Pavlo Kovalov, Oleksandr Cherkashyn, Natalia Shevchuk, Nataliia Markova, Alla Ziuzko, Mykola Pidhorodetskyi, Anatolii Rozumenko, Oleksandr Ivashchuk

    The object of the research is the extraction of waxes from the waste of the oil and fat industry – spent perlite. As a result of oil winterization, a significant amount of spent filter powders is formed, the disposal of which poses a danger to the environment. At the same time, winterization waste contains a significant amount of oil and wax, which are important components of many types of products. Oil and wax extraction involves the use of volatile, fire-hazardous solvents. An urgent task is to develop new safe and effective technologies for obtaining oils and waxes from winterization waste. The technology of extracting waxes from spent perlite, obtained as a result of winterization of sunflower oil, which involves treatment of perlite with sodium chloride solution, was investigated. Perlite was used according to SOU 15.4-37-210:2004 (CAS Number 93763-70-3) with indicators: mass fraction of fat – 20.1 %, peroxide value – 19.5 ½ O mmol/kg, acid value – 3.5 mg KOH/g. The temperature of mass settling after treatment with sodium chloride is 20 °C, the duration – 10 hours. The following rational conditions for perlite processing using sodium chloride were determined: the concentration of dry sodium chloride (by weight of perlite) – 35.0 %, the duration of mass boiling – 30 minutes. Under these conditions, the experimental value of the saponification value of the obtained wax was 120.5 mg KOH/g. Wax quality indicators: melting point 71.5 °C, acid value 1.6 mg KOH/g, mass fraction of moisture 0.63 %. The obtained results make it possible to obtain high-quality waxes from the waste of the oil and fat industry using a safe and affordable substance (sodium chloride). This will make it possible to avoid the need for waste disposal and increase the profitability of oil and fat enterprises due to obtaining valuable products from production waste

  • Open Access

    ІГРОВІ ВПРАВИ ТА ТРЕНІНГИ З ПОЖЕЖНОЇ БЕЗПЕКИ – ЕТАПИ СТАНОВЛЕННЯ ДЕРЖАВНОГО СТАНДАРТУ ПОЧАТКОВОЇ ОСВІТИ

    by О.в. Черкашин, П.а. Ковальов, С.м. Щербак

    В дослідженні розглянуто сучасні форми та методи формування у молодших школярів знань про пожежну безпеку. Акцентовано увагу на вікові особливості школярів під час виконання небезпечних завдань. Запропоновано ігрові вправи, які можуть бути використані вчителями загальноосвітніх та спеціалізованих навчальних закладів у виховному процесі під час навчання молодших школярів пожежної безпеки на етапі становлення Державного стандарту початкової освіти: у системі післядипломної педагогічної освіти під час проведення семінарів, конференцій, круглих столів, тренінгів, нарад, з метою підвищення якісного рівня професійної підготовки директорів шкіл, заступників директорів шкіл із виховної роботи, педагогів початкових класів; організації наукової роботи студентів та проведення педагогічної практики у початковій школі.

  • Open Access

    FIRE RESISTANCE OF REINFORCED CONCRETE AND STEEL STRUCTURES

    by Volodymyr Sadkovyi, Volodymyr Andronov, Oleg Semkiv, Andrii Kovalov, Evgenіy Rybka, Yurii Otrosh, Mykola Udianskyi, Volodymyr Koloskov, Alexander Danilin, Pavlo Kovalov

    The scientific bases of ensuring fire resistance of reinforced concrete and steel building structures in the conditions of modern extreme influences are laid. The current state of fire safety of buildings and structures, as well as approaches, methods and tools for its assessment are analyzed. Analysis of emergencies and fires in the world has shown that the vast majority of them occur in buildings and structures. It is shown that the cause of catastrophic consequences and destruction is the non-compliance of the actual limit of fire resistance of building structures with regulatory requirements. This is due to the imperfection of methods and means of assessing the fire resistance of building structures, including fire-retardant. To overcome the shortcomings identified during the analysis, the paper develops physical and mathematical models of thermal processes occurring in the fire-retardant reinforced concrete structure. Based on the proposed models, a computational-experimental method for estimating the fire resistance of such structures has been developed. The efficiency of the proposed method was tested by identifying the relationship between the parameters of the fire-retardant plaster coating “Neospray” and the fire resistance of fire-retardant multi-hollow reinforced concrete floor. The study of fire resistance of steel structures is proposed to be carried out using reduced samples in the form of steel plates with dimensions of 500×500×5 mm. Based on the proposed models, a calculation and experimental method for estimating the fire resistance of steel structures, as well as an algorithm and procedures for its implementation have been developed. The verification of the efficiency of the proposed method was carried out in the ANSYS software package using the aged coating “Phoenix STS” and the coating “Amotherm Steel Wb” under heating conditions at the temperature of the hydrocarbon fire. The reliability of the developed models and methods is checked. It is established that random errors in temperature measurement significantly affect the accuracy of determining the thermophysical characteristics and limits of fire resistance. In general, the efficiency of the proposed calculation and experimental methods with sufficient accuracy for engineering calculations is confirmed.


  • Open Access

    Improvement of the model of object recognition in aero photographs using deep convolutional neural networks

    by Vadym Slyusar, Mykhailo Protsenko, Anton Chernukha, Pavlo Kovalov, Pavlo Borodych, Serhii Shevchenko, Oleksandr Chernikov, Serhii Vazhynskyi, Oleg Bogatov, Kirill Khrustalev

    Detection and recognition of objects in images is the main problem to be solved by computer vision systems. As part of solving this problem, the model of object recognition in aerial photographs taken from unmanned aerial vehicles has been improved. A study of object recognition in aerial photographs using deep convolutional neural networks has been carried out. Analysis of possible implementations showed that the AlexNet 2012 model (Canada) trained on the ImageNet image set (China) is most suitable for this problem solution. This model was used as a basic one. The object recognition error for this model with the use of the ImageNet test set of images amounted to 15 %. To solve the problem of improving the effectiveness of object recognition in aerial photographs for 10 classes of images, the final fully connected layer was modified by rejection from 1,000 to 10 neurons and additional two-stage training of the resulting model. Additional training was carried out with a set of images prepared from aerial photographs at stage 1 and with a set of VisDrone 2021 (China) images at stage 2. Optimal training parameters were selected: speed (step) (0.0001), number of epochs (100). As a result, a new model under the proposed name of AlexVisDrone was obtained. The effectiveness of the proposed model was checked with a test set of 100 images for each class (the total number of classes was 10). Accuracy and sensitivity were chosen as the main indicators of the model effectiveness. As a result, an increase in recognition accuracy from 7 % (for images from aerial photographs) to 9 % (for the VisDrone 2021 set) was obtained which has indicated that the choice of neural network architecture and training parameters was correct. The use of the proposed model makes it possible to automate the process of object recognition in aerial photographs. In the future, it is advisable to use this model at ground stations of unmanned aerial vehicle complex control when processing aerial photographs taken from unmanned aerial vehicles, in robotic systems, in video surveillance complexes and when designing unmanned vehicle systems


  • Open Access

    The geoecological analysis performed for the geochemical composition of ash and slag waste obtained at Zmiiv thermal power plant

    by Olena V. Krainiuk, Yuriy V. Buts, Roman V. Ponomarenko, Vitalii V. Asotskyi, Pavlo A. Kovalev

    The objective of the study was the composition of ash and slag waste from the Zmiiv TPP (thermal power plant) and the peculiarities of migration of heavy metals (HM) from the place of storage of ash and slag waste into the ecosystem. To achieve this goal, the following tasks were solved: chemical analysis of ash and slag waste of the Zmiiv TPP; identification of the probability of HM migration into the soil environment in the places of ash and slag waste storage. Ash and slag of the Zmiiv TPP contain Cu, Cr, As, Cd, Ni, Pb in quantities several times higher than the threshold limit value (TLV). For ash and slag wastes, the total pollution rate was Zc = 43, which corresponds to a high level. That is, this artificial horizon is dangerous. HMs migrate to groundwater and soils near the ash stockpiles as a result of infiltration of precipitation waters, leaks from water-bearing communications, water filtration through the base of the ash stockpiles of the Zmiiv TPP. To determine soil contamination near the ash stockpiles, we analyzed soil at the distances of 0, 5, 10, 50 and 100 meters. The contents of the HM decreased further away from the stockpiles. At the distance of up to 100 meters from the dump, there were excesses of the threshold limit values for Ni, Cu, As, Cr in the soil. The concentration factor exceeded one for Cr, As, Cu, Cd, Ni. Only at the distance of 100 meters did the contents of Pb and Zn reached the background values. The calculation of the total rate of soil contamination allowed us to classify these soils as moderately dangerous and acceptable. However, the Zn indicator has several significant disadvantages, particularly it does not take into account the differences in the potential hazards of the elements, as well as, most importantly, the synergistic effects of polymetallic pollution. The coefficient of synergistic effect of heavy metals was 26.64 (in the soil of the ash stockpiles), then decreased, but even at the distance of 100 meters it equaled 11.23, i.e. at the distance of 0... 100 m from the ash stockpiles, the overall actions exceed the norm. The study revealed that Cu, Ni, Zn and Cr had low mobility in the soil near the ash stockpiles and therefore accumulated near the stockpiles, which may be explained by neutral and slightly alkaline soil pH values. The ratio of mineral phases and glass varied, but we should note the predominance of aluminosilicates, calcium silicates and glass in the ash and slag wastes. Heavy metal compounds are confined mainly to amorphized clay aggregates and soot-coal ash formation, to a lesser extent to slag glass and even less to grains of quartz sand. Since ash contains such fractions that can be easily carried by the wind, it should be assumed that ingress of HM into the ecosystem occurs by air, which also contributes to air pollution. The solution to the problem of ash and slag waste disposal can be found in their utilization in the production of construction materials, in road construction, but it is necessary to study the composition of ash and slag and the probability of migration of HM depending on the conditions of use.


  • Open Access

    Development of a technique for restoring the efficiency of film ITO/CdS/CdTe/Cu/Au SCs after degradation

    by Natalya Deyneko, Pavlo Kovalev, Oleg Semkiv, Igor Khmyrov, Roman Shevchenko

    Development of a technique for restoring the efficiency of film ITO/CdS/CdTe/Cu/Au SCs after degradation