Lithium All‐Solid‐State Batteries Fabricated at Room Temperature by the Powder Aerosol Deposition Method with Garnet‐Type Electrolyte and Graded Composite Cathode
Open Access
- 23 August 2024
- journal article
- research article
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (3)
Abstract
Lithium‐based all‐solid‐state batteries (ASSBs) are attracting worldwide attention as the next step in the evolution of Li‐ion batteries (LIBs). They have the potential to address safety concerns and limited energy densities, which are key challenges for LIBs. The current focus is on enhancing the electrochemical properties of ASSBs. However, a suitable economic method for fabricating them remains to be established, especially when ceramic materials are used as solid electrolytes. The powder aerosol deposition method (PAD or ADM) is a ceramic processing method that uses raw ceramic powders to fabricate dense, several micrometer thick ceramic films. The entire process takes place at room temperature and in the absence of additional binders. Therefore, PAD is used in this study to fabricate ASSBs with LiNi 0.83 Mn 0.11 Co 0.06 O 2 (NMC) as the cathode active material and Al 0.2 Li 6.025 La 3 Zr 1.625 Ta 0.375 O 12 (LLZO) as the solid electrolyte. The cathode is fabricated as a composite with a gradient in the electrolyte concentration. The successful fabrication is confirmed through scanning electron microscopy and energy‐dispersive X‐ray spectroscopy analysis. Electrochemical characterization shows that a PAD‐ASSB can be cycled. Furthermore, it can be shown that 145 µm thick NMC films can be fabricated by PAD. The electrochemical results are compared with the theoretical potential of PAD‐ASSBs, and methods to further improve the achieved state are discussed.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (03XP0441A)
This publication has 79 references indexed in Scilit:
- On the Origin of Anode and Cathode Contributions to the Impedance of All‐Solid‐State BatteriesBatteries & Supercaps, 2024
- Influence of Electrode Structuring Techniques on the Performance of All‐Solid‐State BatteriesBatteries & Supercaps, 2024
- Revealing the Deposition Mechanism of the Powder Aerosol Deposition Method Using Ceramic Oxide Core–Shell ParticlesAdvanced Materials, 2023
- Optimizing the Composite Cathode Microstructure in All‐Solid‐State Batteries by Structure‐Resolved SimulationsBatteries & Supercaps, 2023
- Designing Cathodes and Cathode Active Materials for Solid‐State BatteriesAdvanced Energy Materials, 2022
- Powder Aerosol Deposition as a Method to Produce Garnet‐Type Solid Ceramic Electrolytes: A Study on Electrochemical Film Properties and Industrial ApplicationsEnergy Technology, 2021
- Structure Design of Cathode Electrodes for Solid‐State Batteries: Challenges and ProgressSmall Structures, 2020
- What Happens during Thermal Post‐Treatment of Powder Aerosol Deposited Functional Ceramic Films? Explanations Based on an Experiment‐Enhanced Literature SurveyAdvanced Materials, 2020
- Interface Engineering for Garnet‐Based Solid‐State Lithium‐Metal Batteries: Materials, Structures, and CharacterizationAdvanced Materials, 2018
- Reducing Interfacial Resistance between Garnet‐Structured Solid‐State Electrolyte and Li‐Metal Anode by a Germanium LayerAdvanced Materials, 2017