Blow molding of mechanically recycled post‐consumer rigid polyethylene packaging waste
Open Access
- 13 September 2024
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (12) , 5968-5983
Abstract
Recycled post‐consumer rigid polyethylene (PE) packaging waste was washed and compounded on a pilot scale using different processing conditions and the processability of recycled materials with blow molding was assessed. Compared to virgin grade high‐density PE, the recycled materials showed a lower crystallinity, a lower thermo‐oxidative stability, a higher ash content, a lower viscosity and melt elasticity, and a lower melt strength and drawability. The thermo‐oxidative stability varied due to the different washing media. Rheological characterization by frequency‐sweep measurements indicated that the virgin grade PE had as expected more linear‐polymer‐like characteristics whereas the recycled materials showed chain branching or crosslinking related to the processing condition during compounding. The recycled materials were successfully blow molded into 4 L‐containers where they showed less resistance to flow than the virgin grade PE. The recycled materials differed in color when different washing media were used. There were no significant differences in the mechanical properties of the 4 L‐containers made of virgin grade and recycled PE.Highlights: Washing, compounding, and blow molding of rigid polyethylene packaging waste were studied. The degradation varied depending on the washing and compounding conditions. Rheological results indicated chain branching or crosslinking due to degradation.Keywords
This publication has 50 references indexed in Scilit:
- Safety of recycled plastics and textiles: Review on the detection, identification and safety assessment of contaminantsChemosphere, 2022
- Processing household plastics for recycling – A reviewCleaner Materials, 2022
- The Frontier of Plastics Recycling: Rethinking Waste as a Resource for High‐Value ApplicationsMacromolecular Chemistry and Physics, 2022
- A qualitative assessment of long chain branching content in LLDPE, LDPE and their blends via thermorheological analysisJournal of Applied Polymer Science, 2013
- Branched Polyolefins2011
- Influence of cleaning conditions on the degradation of recycled HDPEJournal of Applied Polymer Science, 2009
- A modeling approach to the effect of resin characteristics on parison formation in extrusion blow moldingPolymer Engineering & Science, 2008
- Influence of long‐chain branching on the rheological behavior of polyethylene in shear and extensional flowPolymer Engineering & Science, 2005
- Van Gurp-Palmen Plot II - classification of long chain branched polymers by their topologyRheologica Acta, 2002
- Correlation of capillary entrance pressure drops with normal stress dataJournal of Applied Polymer Science, 1968