Hermeticity and diffusion investigation in polysilicon film encapsulation for microelectromechanical systems
Authors:
- 1 January 2009
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 105 (1) , 013514
Abstract
The hermeticity and diffusion behavior of “epi-seal” encapsulation [R. N. Candler et al., J. Microelectromech. Syst. 15, 1446 (2006); B. Kim et al., Proceedings of the ASME 2007 InterPACK Conference (InterPACK’07), 33234 (2007)], an epitaxially deposited polysilicon film encapsulation for microelectromechanical systems (MEMSs), were investigated. MEMS resonators with pressure sensitive quality factor were fabricated inside episeal cavities. By measuring the quality factor and inferring cavity pressure, leakage through the encapsulation was studied as a continuation of previous hermeticity investigations [B. Kim et al., Proceedings of the 2004 ASME International Mechanical Engineering Congress and Exposition, IMECE, pp. 413–416 (2004)]. During long-term monitoring performed at 100 °C in a normal atmosphere, the encapsulated cavity pressure increased at a rate of 5–10 mTorr/yr, whereas no measurable pressure change could be detected in our previous room temperature measurement performed with identically designed and encapsulated resonators. To identify the cause of this pressure increase, the diffusive gas species and diffusion pathways in the epi-seal encapsulation were investigated experimentally. Various gas species in the atmosphere were tested in a 400 °C accelerated environment. These tests identified hydrogen and helium as highly diffusive gas species and showed argon and nitrogen to be much less diffusive under these conditions. Also, a series of devices with modifications of encapsulation geometry was tested in a hydrogen environment at 400 °C. Silicon dioxide, used for sacrificial and passivation layers, was identified as the primary diffusion pathway through the epi-seal encapsulation. These experimental results and diffusion pathway models were compared with the diffusion activation energy of various gas species in semiconductor materials, enabling design and process optimization for improved hermeticity of wafer-scale thin-film encapsulation for MEMS devices.Keywords
This publication has 24 references indexed in Scilit:
- On-Wafer Monolithic Encapsulation by Surface Micromachining With Porous Polysilicon ShellJournal of Microelectromechanical Systems, 2007
- Long-Term and Accelerated Life Testing of a Novel Single-Wafer Vacuum Encapsulation for MEMS ResonatorsJournal of Microelectromechanical Systems, 2006
- A Low-Temperature Thin-Film Electroplated Metal Vacuum PackageJournal of Microelectromechanical Systems, 2004
- Chip-level vacuum packaging of micromachines using nanogettersIEEE Transactions on Advanced Packaging, 2003
- Micropackaging Technologies for Integrated Microsystems: Applications to MEMS and MOEMS2003
- Wafer-level vacuum packaging for MEMSJournal of Vacuum Science & Technology A, 1999
- Damping characteristics of beam-shaped micro-oscillatorsSensors and Actuators A: Physical, 1995
- Viscous damping model for laterally oscillating microstructuresJournal of Microelectromechanical Systems, 1994
- Miniaturization of Tuning ForksScience, 1968
- The theory of oscillating-vane vacuum gaugesVacuum, 1966