Performance Analysis and Test Research of PEMFC Oil-Free Positive Displacement Compressor for Vehicle
Open Access
Abstract
In order to study the matching characteristics of the positive displacement air compressor and the PEMFC (proton exchange membrane fuel cells), air supply subsystem, the basic operating performance parameters of the scroll and single-screw air compressors were analyzed with the focus on the oil-free double-wrap scroll compressor. According to the thermodynamic model and three-dimensional unsteady-state numerical simulation, the variation of the temperature, pressure, and velocity was obtained. Besides, under the rated operating condition of the compressor, the inlet and outlet mass flow rate of the fluid in the working chamber with the orbiting angle of the crank was achieved. Based on the built test platform, the actual working process of scroll and screw compressors was analyzed. This study indicates that the volume flow can be significantly increased by improving the speed of the positive displacement compressor. Based on the experimental measurement, when the height of the scroll tooth of the scroll compressor increases by 5 mm, the volume flow of the prototype SC2 increases by 0.17 and the exhaust temperature is reduced by 13 °C at the rated speed.
Keywords
Funding Information
- National Natural Science Foundation of China (Grant No.51675254, 51966009)
- the national key Research and Development Program of China (GrantNo. SQ2020YFF0420989)
- the Talent Innovation and Entrepreneurship Program of Lanzhou (Grant No. 2020-RC-23)
- the Science and Technology Program of Gansu Province (Grant No. 20YF8GA057)
This publication has 16 references indexed in Scilit:
- Unsteady characteristic and flow mechanism of a scroll compressor with novel discharge port for electric vehicle air conditioningInternational Journal of Refrigeration, 2020
- Internal flow field and heat transfer investigation inside the working chamber of a scroll compressorEnergy, 2020
- Thermodynamics and flow unsteadiness analysis of trans-critical CO2 in a scroll compressor for mobile heat pump air-conditioning systemApplied Thermal Engineering, 2020
- Structured Mesh Generation and Numerical Analysis of a Scroll Expander in an Open-Source EnvironmentEnergies, 2020
- Theoretical study on heat transfer characteristics of single screw refrigeration compressor with Multicolumn envelope meshing pairApplied Thermal Engineering, 2020
- Analysis of the three-dimensional transient flow in a scroll refrigeration compressorApplied Thermal Engineering, 2017
- Novel structured dynamic mesh generation for CFD analysis of scroll compressorsProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2015
- Experimental study and CFD approach for scroll type expander used in low-temperature organic Rankine cycleApplied Thermal Engineering, 2014
- Analytical model of traveling-wave type ultrasonic motor based on the energy equivalent methodChinese Journal of Mechanical Engineering, 2008
- Convective heat transfer in a scroll compressor chamber: a 2-D simulationInternational Journal of Thermal Sciences, 2004