Bin Peng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Bin Peng has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Bingguo Zhu
School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China
2 shared publications Jian Sun
School of Mechanical & Electronical Engineering, Lanzhou University of Technology, Lanzhou, China
2 shared publications- Bingguo Zhu
School of Mechanical & Electronical Engineering, Lanzhou University of Technology, Lanzhou 730050, China
1 shared publication - Jian Sun
Lanzhou University of Technology
1 shared publication - Jian Sun
Research Center, School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China
1 shared publication - Ke Niu
Faculty of Mechanical and Electrical Engineering Lanzhou University of Technology 730050 Lanzhou China
1 shared publication
Latest Publications
- 25 November 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 48 (1) , 42
Characteristic analysis and dynamic study of a scroll compressor with a combined VHV profile
- 25 November 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 48 (1) , 42
Characteristic analysis and dynamic study of a scroll compressor with a combined VHV profile
- Open Access
- 7 January 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
Experimental study on steady-state operation of organic Rankine cycle system under different operating conditions
In this study, the effects of six operating conditions on the performance of a 3 kW- ORC (organic Rankine cycle) system were investigated. The results of experiments show that, despite differences in the physical parameters of the three working fluids used, the performance of the ORC system was similar. Further, the cooling water temperature (CWT) was strictly controlled, but the experimental results were affected by the condensation temperature, however the experimental system can maintain stable operation. Since generators are affected by different factors, the variation in generator generation fluctuates over a wide range during steady state operation of the system. The theoretical shaft work of the expander and generator power generation of the system using R245fa exceeds that of the other two working fluids due to the density. It had a maximum generator power conversion efficiency of 64.651% under C1 condition, maximum exergy efficiency of 27.346% under C3 condition; the system has a maximum cycle efficiency of 9.543% and a cold energy utilization efficiency of 5.633%, under C6 conditions; although maximum power generation (1.019 kW) and maximum net work (1.321 kW), the total exergy loss of the system also reached its maximum value (13.756kw) under C5 condition.
- 7 January 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
Open AccessExperimental study on steady-state operation of organic Rankine cycle system under different operating conditions
In this study, the effects of six operating conditions on the performance of a 3 kW- ORC (organic Rankine cycle) system were investigated. The results of experiments show that, despite differences in the physical parameters of the three working fluids used, the performance of the ORC system was similar. Further, the cooling water temperature (CWT) was strictly controlled, but the experimental results were affected by the condensation temperature, however the experimental system can maintain stable operation. Since generators are affected by different factors, the variation in generator generation fluctuates over a wide range during steady state operation of the system. The theoretical shaft work of the expander and generator power generation of the system using R245fa exceeds that of the other two working fluids due to the density. It had a maximum generator power conversion efficiency of 64.651% under C1 condition, maximum exergy efficiency of 27.346% under C3 condition; the system has a maximum cycle efficiency of 9.543% and a cold energy utilization efficiency of 5.633%, under C6 conditions; although maximum power generation (1.019 kW) and maximum net work (1.321 kW), the total exergy loss of the system also reached its maximum value (13.756kw) under C5 condition.
- Open Access
Key Technologies and Application of Electric Scroll Compressors: A Review
The electric scroll compressor is driven by a built-in electric motor that rotates the scroll disk. It is known for its simple structure, adjustability, and high efficiency, making it highly promising for various applications. This paper reviews the current application and research status of electric scroll compressors. It covers topics such as the optimal design of scroll compressor profiles, scroll disk leakage sealing, and computer simulation optimization design methods. Additionally, the progress and development trends of vapor-injection scroll compressors (SCVIs) are discussed. This paper also presents the latest research progress on the application of the new refrigerant CO2 in electric scroll compressors, along with its latest applications that align with sustainable development requirements. Finally, this paper concludes with recommendations for the application of electric scroll compressors and suggests future directions for research.
Open AccessKey Technologies and Application of Electric Scroll Compressors: A Review
The electric scroll compressor is driven by a built-in electric motor that rotates the scroll disk. It is known for its simple structure, adjustability, and high efficiency, making it highly promising for various applications. This paper reviews the current application and research status of electric scroll compressors. It covers topics such as the optimal design of scroll compressor profiles, scroll disk leakage sealing, and computer simulation optimization design methods. Additionally, the progress and development trends of vapor-injection scroll compressors (SCVIs) are discussed. This paper also presents the latest research progress on the application of the new refrigerant CO2 in electric scroll compressors, along with its latest applications that align with sustainable development requirements. Finally, this paper concludes with recommendations for the application of electric scroll compressors and suggests future directions for research.
- Open Access
- 29 February 2024
- Published by Madison Academic Press in Advances in Engineering Technology Research
- Vol. 10 (1) , 191
Research and Optimization of Tubular Column Joint Identification Technology for Intelligent Drilling Platforms
An improved target detection algorithm based on YOLOv5s is proposed to be applied to identify and localize tubular column joints in The improved SC-YOLOv5s model is obtained by combining SPPF, CBAM and the improved multi-scale feature fusion network BiFPN. The improved SC-YOLOv5s model is obtained by combining SPPF, CBAM and the improved multi-scale feature fusion network BiFPN. The SPPF structure introduces spatial pyramid pooling in the network, which can effectively capture the features of the target at different scales and improve detection precision. different scales and improve the detection precision and recall of the target, while the CBAM attention mechanism can adaptively learn the target's spatial and channel feature relationships. s spatial and channel feature relationships, improving the model's ability to distinguish between targets and anti-interference ability The improved multi-scale feature fusion network BiFPN combines Bottom-up and Top-down feature transfer mechanisms, which can better fuse feature information at different levels, making the model's ability to distinguish between targets and anti-interference ability. information at different levels, making the model better adapted to detection tasks in various complex environments. The experimental results show that the improved algorithm achieves the following results that the improved algorithm achieves significant performance improvement in the pipe-column joint detection task, with a mAP value of 99.44%, a frame rate of 136 FPS, and an accuracy of 98.4%, which is 6.6% higher than the original model. The algorithm also improves sensing capability, accuracy and robustness, and outperforms the original model. The algorithm also improves sensing capability, accuracy and robustness, and outperforms other mainstream models in terms of precision. This provides a reference for automatic processing of tubular columns in intelligent oil rigs.
- 29 February 2024
- Published by Madison Academic Press in Advances in Engineering Technology Research
- Vol. 10 (1) , 191
Open AccessResearch and Optimization of Tubular Column Joint Identification Technology for Intelligent Drilling Platforms
An improved target detection algorithm based on YOLOv5s is proposed to be applied to identify and localize tubular column joints in The improved SC-YOLOv5s model is obtained by combining SPPF, CBAM and the improved multi-scale feature fusion network BiFPN. The improved SC-YOLOv5s model is obtained by combining SPPF, CBAM and the improved multi-scale feature fusion network BiFPN. The SPPF structure introduces spatial pyramid pooling in the network, which can effectively capture the features of the target at different scales and improve detection precision. different scales and improve the detection precision and recall of the target, while the CBAM attention mechanism can adaptively learn the target's spatial and channel feature relationships. s spatial and channel feature relationships, improving the model's ability to distinguish between targets and anti-interference ability The improved multi-scale feature fusion network BiFPN combines Bottom-up and Top-down feature transfer mechanisms, which can better fuse feature information at different levels, making the model's ability to distinguish between targets and anti-interference ability. information at different levels, making the model better adapted to detection tasks in various complex environments. The experimental results show that the improved algorithm achieves the following results that the improved algorithm achieves significant performance improvement in the pipe-column joint detection task, with a mAP value of 99.44%, a frame rate of 136 FPS, and an accuracy of 98.4%, which is 6.6% higher than the original model. The algorithm also improves sensing capability, accuracy and robustness, and outperforms the original model. The algorithm also improves sensing capability, accuracy and robustness, and outperforms other mainstream models in terms of precision. This provides a reference for automatic processing of tubular columns in intelligent oil rigs.
- Open Access
Assessment of Optimal Operating Range and Case Verification of a Waste Heat Air-Source Heat Pump Water Heater Based on a Semiempirical Parametric Model
Waste heat air-source heat pump water heater (WH-ASHPWH) systems have been widely used to provide water heating in buildings due to their advantages of high efficiency and low environmental impact. It is important to determine reasonable operating conditions for WH-ASHPWH systems to improve their heating efficiency, especially for systems using industrial waste heat. In this study, a semiempirical parametric model of a WH-ASHPWH system was established to simulate heating performance under different working conditions and determine the optimum operating range of the system. A new discrete model for a tube-in-tube condenser was also generated. Taking the equipment of a pharmaceutical factory as an example, the heat exchanger model was first calibrated; then, the global model was used to study the effects of different air-side and condenser-side waste heat conditions on the heating performance of the system. According to the simulation results, the coefficient of performance (COP) reached a maximum value of 4.5 under the optimum working conditions. The deviation between the COP simulation data and experimental values was less than 8.28%, and the simulation time was less than 8 min. These metrics indicate that the model is reasonable and efficient.
Open AccessAssessment of Optimal Operating Range and Case Verification of a Waste Heat Air-Source Heat Pump Water Heater Based on a Semiempirical Parametric Model
Waste heat air-source heat pump water heater (WH-ASHPWH) systems have been widely used to provide water heating in buildings due to their advantages of high efficiency and low environmental impact. It is important to determine reasonable operating conditions for WH-ASHPWH systems to improve their heating efficiency, especially for systems using industrial waste heat. In this study, a semiempirical parametric model of a WH-ASHPWH system was established to simulate heating performance under different working conditions and determine the optimum operating range of the system. A new discrete model for a tube-in-tube condenser was also generated. Taking the equipment of a pharmaceutical factory as an example, the heat exchanger model was first calibrated; then, the global model was used to study the effects of different air-side and condenser-side waste heat conditions on the heating performance of the system. According to the simulation results, the coefficient of performance (COP) reached a maximum value of 4.5 under the optimum working conditions. The deviation between the COP simulation data and experimental values was less than 8.28%, and the simulation time was less than 8 min. These metrics indicate that the model is reasonable and efficient.
- Open Access
Analysis of Tangential Leakage Flow Characteristics of Oil-Free Scroll Expander for a Micro-Scale Compressed Air Energy Storage System
Tangential leakage loss is the primary factor that significantly affects the output performance of oil-free scroll expanders. A scroll expander can function under different operating conditions, and the flow of tangential leakage and generation mechanism is different. This study employed computational fluid dynamics to investigate the unsteady flow characteristics of the tangential leakage flow of a scroll expander with air as the working fluid. Consequently, the effects of different radial gap sizes, rotational speeds, inlet pressures, and temperatures on the tangential leakage were discussed. The tangential leakage decreased with increases in the scroll expander rotational speed, inlet pressure, and temperature, and decreased with decrease in radial clearance. With an equal-proportional increase in radial clearance, the flow form of the gas in the first expansion and back-pressure chambers became more complicated; when the radial clearance increased from 0.2 to 0.5 mm, the volumetric efficiency of the scroll expander decreased by approximately 5.0521%. Moreover, because of the large radial clearance, the tangential leakage flow maintained a subsonic flow. Further, the tangential leakage decreased with increase in rotational speed, and when the rotational speed increased from 2000 to 5000 r/min, the volumetric efficiency increased by approximately 8.7565%.
Open AccessAnalysis of Tangential Leakage Flow Characteristics of Oil-Free Scroll Expander for a Micro-Scale Compressed Air Energy Storage System
Tangential leakage loss is the primary factor that significantly affects the output performance of oil-free scroll expanders. A scroll expander can function under different operating conditions, and the flow of tangential leakage and generation mechanism is different. This study employed computational fluid dynamics to investigate the unsteady flow characteristics of the tangential leakage flow of a scroll expander with air as the working fluid. Consequently, the effects of different radial gap sizes, rotational speeds, inlet pressures, and temperatures on the tangential leakage were discussed. The tangential leakage decreased with increases in the scroll expander rotational speed, inlet pressure, and temperature, and decreased with decrease in radial clearance. With an equal-proportional increase in radial clearance, the flow form of the gas in the first expansion and back-pressure chambers became more complicated; when the radial clearance increased from 0.2 to 0.5 mm, the volumetric efficiency of the scroll expander decreased by approximately 5.0521%. Moreover, because of the large radial clearance, the tangential leakage flow maintained a subsonic flow. Further, the tangential leakage decreased with increase in rotational speed, and when the rotational speed increased from 2000 to 5000 r/min, the volumetric efficiency increased by approximately 8.7565%.
- Open Access
Performance Analysis and Test Research of PEMFC Oil-Free Positive Displacement Compressor for Vehicle
In order to study the matching characteristics of the positive displacement air compressor and the PEMFC (proton exchange membrane fuel cells), air supply subsystem, the basic operating performance parameters of the scroll and single-screw air compressors were analyzed with the focus on the oil-free double-wrap scroll compressor. According to the thermodynamic model and three-dimensional unsteady-state numerical simulation, the variation of the temperature, pressure, and velocity was obtained. Besides, under the rated operating condition of the compressor, the inlet and outlet mass flow rate of the fluid in the working chamber with the orbiting angle of the crank was achieved. Based on the built test platform, the actual working process of scroll and screw compressors was analyzed. This study indicates that the volume flow can be significantly increased by improving the speed of the positive displacement compressor. Based on the experimental measurement, when the height of the scroll tooth of the scroll compressor increases by 5 mm, the volume flow of the prototype SC2 increases by 0.17 and the exhaust temperature is reduced by 13 °C at the rated speed.Open AccessPerformance Analysis and Test Research of PEMFC Oil-Free Positive Displacement Compressor for Vehicle
In order to study the matching characteristics of the positive displacement air compressor and the PEMFC (proton exchange membrane fuel cells), air supply subsystem, the basic operating performance parameters of the scroll and single-screw air compressors were analyzed with the focus on the oil-free double-wrap scroll compressor. According to the thermodynamic model and three-dimensional unsteady-state numerical simulation, the variation of the temperature, pressure, and velocity was obtained. Besides, under the rated operating condition of the compressor, the inlet and outlet mass flow rate of the fluid in the working chamber with the orbiting angle of the crank was achieved. Based on the built test platform, the actual working process of scroll and screw compressors was analyzed. This study indicates that the volume flow can be significantly increased by improving the speed of the positive displacement compressor. Based on the experimental measurement, when the height of the scroll tooth of the scroll compressor increases by 5 mm, the volume flow of the prototype SC2 increases by 0.17 and the exhaust temperature is reduced by 13 °C at the rated speed.