BZBingguo Zhu

Bingguo Zhu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bingguo Zhu has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Assessment of Optimal Operating Range and Case Verification of a Waste Heat Air-Source Heat Pump Water Heater Based on a Semiempirical Parametric Model

    by Youxin Zhou, Bin Peng, Bingguo Zhu

    Waste heat air-source heat pump water heater (WH-ASHPWH) systems have been widely used to provide water heating in buildings due to their advantages of high efficiency and low environmental impact. It is important to determine reasonable operating conditions for WH-ASHPWH systems to improve their heating efficiency, especially for systems using industrial waste heat. In this study, a semiempirical parametric model of a WH-ASHPWH system was established to simulate heating performance under different working conditions and determine the optimum operating range of the system. A new discrete model for a tube-in-tube condenser was also generated. Taking the equipment of a pharmaceutical factory as an example, the heat exchanger model was first calibrated; then, the global model was used to study the effects of different air-side and condenser-side waste heat conditions on the heating performance of the system. According to the simulation results, the coefficient of performance (COP) reached a maximum value of 4.5 under the optimum working conditions. The deviation between the COP simulation data and experimental values was less than 8.28%, and the simulation time was less than 8 min. These metrics indicate that the model is reasonable and efficient.


  • Open Access

    Performance Analysis and Test Research of PEMFC Oil-Free Positive Displacement Compressor for Vehicle

    by Jian Sun, Bin Peng, Bingguo Zhu

    In order to study the matching characteristics of the positive displacement air compressor and the PEMFC (proton exchange membrane fuel cells), air supply subsystem, the basic operating performance parameters of the scroll and single-screw air compressors were analyzed with the focus on the oil-free double-wrap scroll compressor. According to the thermodynamic model and three-dimensional unsteady-state numerical simulation, the variation of the temperature, pressure, and velocity was obtained. Besides, under the rated operating condition of the compressor, the inlet and outlet mass flow rate of the fluid in the working chamber with the orbiting angle of the crank was achieved. Based on the built test platform, the actual working process of scroll and screw compressors was analyzed. This study indicates that the volume flow can be significantly increased by improving the speed of the positive displacement compressor. Based on the experimental measurement, when the height of the scroll tooth of the scroll compressor increases by 5 mm, the volume flow of the prototype SC2 increases by 0.17 m3/min and the exhaust temperature is reduced by 13 °C at the rated speed.