Synergistic Effects of Fiber Inclination, Geometry, and Thermal Treatment on Fe-SMA Fiber Pull-Out Resistance in High-Performance Concrete
Open Access
Abstract
Iron-based shape memory alloy (Fe-SMA) fibers can enhance cementitious composites through both crack bridging and thermally activated recovery stresses. Since fiber pull-out governs load transfer at the micro scale, understanding the combined effects of fiber geometry, inclination, and thermal treatment is essential. This study experimentally investigated the pull-out behavior of hooked-end Fe-SMA fibers embedded in high-performance concrete (HPC). A total of 54 ASTM C307-type briquette specimens were tested using single-hook (3D) and double-hook (4D) fibers at inclination angles of 60°, 75°, and 90° under ambient, 100 °C, and 200 °C conditions. Additional flexural, compressive, and direct tensile tests were conducted on plain HPC exposed to the same thermal regime. At ambient temperature, 4D fibers showed 50–70% higher peak pull-out forces than 3D fibers. Heating to 100 °C further increased pull-out resistance by about 6–17%, and the 4D-60-100 configuration achieved the highest performance. In contrast, exposure to 200 °C reduced pull-out resistance by about 5–12% below ambient values. Overall, a 60° inclination generally provided a better response, while 90° produced the lowest. The results confirm that moderate thermal activation combined with double-hook geometry is the most effective strategy for maximizing Fe-SMA fiber–matrix load transfer in HPC.Keywords
All Related Versions
Funding Information
- Narodowym Centrum Nauki (2023/49/N/ST8/03063)
- Politechnika Poznańska (0412/SBAD/0091)
This publication has 32 references indexed in Scilit:
- Iron-Based Shape Memory Alloys in Construction: A Review of Research, Applications, and ChallengesShape Memory and Superelasticity, 2025
- From experimental testing to computational modeling: A review of shape memory alloy fiber-reinforced concrete compositesComposites Part B: Engineering, 2024
- Predicting the rate effects on hooked-end fiber pullout performance from Ultra-High Performance Concrete (UHPC)Cement and Concrete Research, 2019
- A new physical model for empirical fiber snubbing effect in cementitious composites based on large deflection beam theoryCement and Concrete Composites, 2019
- Flexural capacity and crack-closing performance of NiTi and NiTiNb shape-memory alloy fibers randomly distributed in mortar beamsComposites Part B: Engineering, 2018
- Effect of inclination angle on hooked end steel fiber pullout behavior in ultra-high performance concreteComposite Structures, 2018
- How do fiber shape and matrix composition affect fiber pullout behavior and flexural properties of UHPC?Cement and Concrete Composites, 2018
- Iron-based shape memory alloy strips for strengthening RC members: Material behavior and characterizationConstruction and Building Materials, 2018
- Pullout resistance of straight NiTi shape memory alloy fibers in cement mortar after cold drawing and heat treatmentComposites Part B: Engineering, 2014
- A Novel Fe‐Mn‐Si Shape Memory Alloy With Improved Shape Recovery Properties by VC PrecipitationAdvanced Engineering Materials, 2009