Evaluation of flexural deformation of a lightweight fabricated GFRP emergency bridge with a novel broken-line prestressed cable system
Open Access
- 5 July 2025
- journal article
- research article
- Published by Springer Nature in Advances in Bridge Engineering
- Vol. 6 (1) , 1-29
Abstract
To address the urgent need for rapid traffic restoration after bridge collapse, a novel lightweight fabricated GFRP (Glass Fiber-Reinforced Polymer) emergency bridge with a broken-line prestressed cable system was developed. Full-scale four-point bending tests and initial deformation measurement tests caused by dead load and clearance effect were conducted to determine the flexural deformation of the bridge. It was demonstrated that the broken-line prestressed cable system substantially enhances the structural stiffness while maintaining the advantages of modular assembly. The experimental results revealed that SLYP (Single Lug and Yoke Plate) joints serve as critical load transfer components, and the deformation caused by the clearance effect of SLYP joints cannot be ignored. The calculation method for the equivalent flexural stiffness, distinguishing GTAL (GFRP tube and aluminum alloy deck) part and SLYP joint part, was given. The flexural deformation caused by dead load, live load, prestressing, and clearance effect, considering the axial deformation and spatial angle reduction effect of the steel wire cables, was proposed based on the flexibility method. The validated analytical model exhibited excellent agreement with experimental data. The main parameters influencing the flexural deformation, such as the equivalent flexural stiffness, clearance between the pin and pinhole, height of the segment, length of the vertical stay and turning component, and SLYP joint arrangement, were discussed in detail based on the proposed method.Keywords
Funding Information
- Key Technologies Research and Development Program (2023YFB3711600)
- National Natural Science Foundation of China (52278288, 52308295)
- Natural Science Foundation of Jiangsu Province of China (BK20231028)
This publication has 29 references indexed in Scilit:
- Load-bearing performance of a lightweight emergency bridge assembled by GFRP rectangular tubes with novel prestressed cable systemCase Studies in Construction Materials, 2024
- Vehicle-bridge Interaction Analysis and Maximum Allowable Speed of a Deployable Emergency Repair BeamKSCE Journal of Civil Engineering, 2023
- Failure analysis of composite pre-tightened teeth joints under bending and tension coupling loadEngineering Failure Analysis, 2023
- Experimental and theoretical study on flexural behavior of steel–concrete composite beams strengthened by CFRP plates with unbonded retrofit systemsComposite Structures, 2023
- A comprehensive study on CFRP rapid portable bridge: Design, experimental investigation and finite element analysisComposite Structures, 2022
- Strengthening of metallic beams with different types of pre-stressed un-bonded retrofit systemsComposite Structures, 2017
- Flexural behavior of aluminum I-beams strengthened by pre-stressed CFRP tendonsConstruction and Building Materials, 2016
- Experimental testing and numerical simulation of a temporary rescue bridge using GFRP composite materialsConstruction and Building Materials, 2016
- A novel composite bridge for emergency disaster relief: Concept and verificationComposite Structures, 2015
- Flexural properties of a lightweight hybrid FRP-aluminum modular space truss bridge systemComposite Structures, 2014