Modeling and Experiment of the Critical Depth of Cut at the Ductile–Brittle Transition for a 4H-SiC Single Crystal
Open Access
- 7 June 2019
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 10 (6) , 382
Abstract
In this paper, a theoretical model of the critical depth of cut of nanoscratching on a 4H-SiC single crystal with a Berkovich indenter is proposed, and a series of scratch tests in a nanomechanical test system was performed. Through nanoindentation experimentation on fused quartz, the Berkovich indenter nose radius was indirectly confirmed using least squares. The range of critical depths of cut at the ductile–brittle transition was obtained by SEM observation, and the size of cracks was amplified with increasing scratching depth. The theoretical result of the critical depth of cut at the ductile–brittle transition for a 4H-SiC single crystal is 91.7 nm, which is close to the first obvious pop-in point of the relation curve between tangential force and lateral displacement. Repeated experimental results show good consistency and good agreement with other references.Keywords
Funding Information
- National Natural Science Foundation of China (51575442)
- Natural Science Foundation of Shaanxi Province (2016JZ011)
This publication has 37 references indexed in Scilit:
- Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grindingInternational Journal of Machine Tools and Manufacture, 2008
- Plasticity and deformation microstructure of 4H‐SiC below the brittle‐to‐ductile transitionphysica status solidi (c), 2007
- Cleavage Fracture of Brittle Semiconductors from the Nanometre to the Centimetre ScaleAdvanced Engineering Materials, 2005
- Effects of the friction coefficient on the minimum cutting thickness in micro cuttingInternational Journal of Machine Tools and Manufacture, 2005
- Influence of Structural Defects on the Polishing of Silicon Carbide Single Crystal WafersJapanese Journal of Applied Physics, 2004
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Ductile-Regime Grinding: A New Technology for Machining Brittle MaterialsJournal of Engineering for Industry, 1991
- Microfracture about scratches in brittle solidsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1979
- Mechanical and microscopical investigation of SiC whiskersFibre Science and Technology, 1970
- The strength properties and frictional behaviour of brittle solidsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1954