TSTun Sriana

Tun Sriana

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Tun Sriana has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fuel Specifications of Aqueous Ethanol-Butanol-Gasoline in Stable Emulsion

    by Hanny F. Sangian, Letia R. Benaino, Gerald H. Tamuntuan, Guntur Pasau, Messiah C. Sangian, Henry F. Aritonang, Silvya Yusnica Agnesty, Tun Sriana, Ripal A. Setiawan, Nina M. Kusumaningrum, et al.

    This study investigates the fuel properties of ethanol-butanol-gasoline emulsions prepared with varying ethanol concentrations (80, 90, and 96%) to develop stable and efficient alternative fuels. Key parameters evaluated include the research octane number (RON), Reid vapor pressure (RVP), fuel density, specific gravity (SG), distillation characteristics, and copper strip corrosion resistance, with an emphasis on stability and performance at temperatures between 15 and 30 °C. The results indicate that these fuel blends exhibit high octane ratings, with RON values ranging from 91.8 to 94.1, demonstrating strong anti-knock characteristics suitable for high-performance engines. The RVP increases from 41 to 50 kPa as ethanol content rises, supporting stability under diverse environmental conditions. Fuel density decreases from 0.798 to 0.759 g cm-3, while SG ranges from 0.770 to 0.715, reflecting the influence of ethanol content on fuel mass and volume. Copper strip corrosion tests conducted in accordance with American Society for Testing and Materials, ASTM D130 standards confirmed that all blends are non-corrosive, achieving a “Class 1” corrosion rating and ensuring compatibility with engines containing copper or other metallic components. Distillation tests revealed initial boiling points (IBP) between 41 and 45 °C and final boiling points (FBP) from 122 to 177 °C. Overall, these findings suggest that ethanol-butanol-gasoline emulsions offer notable benefits for enhancing engine performance, reducing emissions, and improving fuel stability.

  • Open Access

    Analysis of compositions and fuel specifications of the aqueous emulsion fuels of gasoline (RON 90)-ethanol-water in stable emulsions at low temperatures

    by Hanny Frans Sangian, Guntur Pasau, Gerald Hendrik Tamuntuan, Arief Widjaja, Ronny Purwadi, Silvya Yusnica Agnesty, Tun Sriana, Arif Nurrahman, Abubakar Tuhuloula, Ramli Thahir

    Many countries worldwide encounter the greatest difficulties in improving people's life quality since fossil fuel reserves are decreasing, causing fuel prices to rise drastically. This problem has made many countries, including Indonesia, struggle to import them from producers in the Middle East. Adding a small part of ethanol to gasoline is one of the solutions that has been investigated and developed. The previous works relating to blended fuels, gasoline and ethanol, generally employed absolute alcohol, which was expensive. A small surfactant was added to the mixture to stabilize the emulsion, and the blending was conducted in normal conditions (room temperature). If the composition of gasoline and aqueous ethanol is not precise, the components can be separated at a specific temperature. The present study is aimed to report the analysis of compositions and fuel specifications of aqueous emulsions of gasoline (RON 90)-ethanol-water in a single phase without using a synthetic surfactant in the temperature range of 0–25 °C. The procedures were as follows: fermentation, ethanol distillation and purification, cooling, blending, and characterization of fuel specifications. Components of gasoline (RON 90)-ethanol-water formed a stable emulsion in the composition range of 28.00‒99.79 %, 0.20‒67.97 %, and 0.01‒3.58 %. The observation found that continually increasing the amount of aqueous ethanol and temperature after one phase was attained would not lead to the separation of components. Therefore, gasoline and aqueous ethanol can form a single phase functioning as a surfactant binding water and fossil fuel. The decrease in temperature after the emulsion is stabilized can separate the components whereby it is caused by the faster density change of aqueous ethanol than gasoline


  • Open Access

    Pengaruh Konsentrasi Sodium Hydroxide (NaOH) pada Proses Delignifikasi Kandungan Lignoselulosa Serat (Fiber) Siwalan (borassus flabellifer) sebagai Bahan Dasar Pembuatan Bioethanol

    by Tun Sriana, Tri Dianpalupidewi, Syamsul Ma’Arif Putera Ukhrawi, Iryanti Fatyasari Nata

    Salah satu sumber energi alternatif yang potensial dikembangkan di Indonesia adalah bioethanol. Serat siwalan adalah limbah organik yang potensial dikembangkan sebagai bahan baku bioethanol. Proses delignifikasi diperlukan sebelum limbah siwalan difermentasi menjadi bioethanol. Pada proses ini, lignin yang terdapat pada serat siwalan akan dipecah untuk mendapatkan selulosa yang dikonversi menjadi gula. Dari hasil penelitian diperoleh bahwa konsentrasi NaOH 1N mampu meningkatkan kadar selulosa hingga 71,37% dibanding dengan konsentrasi NaOH 2N yang hanya mampu menaikkan kadar selulosa sebesar 59,53%. Untuk waktu pemanasan optimal pada proses ini adalah 30 menit pada suhi 100 oC Kata kunci: limbah siwalan, delignifikasi, NaOH, bioethanol, lignin, selulosa


  • Open Access

    The Azeotropic Distillation for Bioethanol Purification: The Effects of Entrainer Solvents

    by T Sriana, S Sakti, T Dianpalupidewi, A Wahyudi

    Bioethanol is one of the most interesting biofuels in Indonesia. In the recent years, various research studies on bioethanol production have been reported. The main problem using bioethanol as alternative energy is the refining process. In this paper, we report on our effort to increase the purity of bioethanol. The effects of different entrainer combinations were investigated. Based on our study, we found that the double entrainers combination generated better ethanol purity compared to a single entrainer. Among the possible combinations of entrainer, the combination of 10% (v/v) n-Heptane on cyclohexane-n-heptane could increase ethanol purity up to 87.39%.


  • Open Access

    Real time optimization of low temperature shift converter of carbon monoxide in an industrial ammonia plant

    by S Y Agnesty, H H Niam, M A Wahyudi, M Yulyana, T Sriana

    The main goal of this work is optimize low temperature shift converter (LTS) of Carbon Monoxide (CO) in an Industrial Ammonia Plant considering life time of the catalyst in that converter. Shift converter is a reactor to convert CO into carbon dioxide. CO in ammonia plant comes from steam reforming process that convert natural gas into hydrogen gas. This process will also produce CO gas, where CO gas is toxic to the catalyst in ammonia syntesis reactor and also able to oxidize Fe in ammonia synthesis that is the reason why CO is one of component that can interfere the ammonia gas manufacturing process. To prevent this, the CO gas purification process needs to be done, one of the method is using shift converter process. From the optimization of several operating conditions in low temperature shift converter, a relatively strong correlation is found between flow rate feed and average temperature bed catalyst with the lifetime of the catalyst. The optimization result show that the optimum flow rate feed in LTS is 2754.49 m3/day and average temperature bed catalyst is 224°C. Operating at the proposed optimal condition increases life time of the catalyst about 8.02% per year.


  • Open Access

    Improvement of methane composition utilizing activated carbon adsorption column for biogas purification from food waste

    by S Lestari, T Sriana, M S Raharjo, I N Sudiarte, M N Anugrah

    One of the potential candidates to produce biogas is food waste. The main composition in biogas are methane which has calorific value and carbon dioxide which has no calorific value. To increase calorific value of biogas, a purification process needed by removing carbon dioxide content. In this study, coconut shell charcoal is applied as activated carbon. The different flow rates of biogas entered into adsorption column are investigated. It was found that the optimum flow rate is 2 l/min to increase methane from 90.20 to 98.14%.

  • Open Access

    Characteristic study of biodiesel mixtures from used oil and diesel oil

    by H N Aulia, F N Hidayat, T Sriana

    Biodiesel is an alternative fuel for diesel machines. Used cooking oil is blended with diesel with a certain volume ratio to improve the characteristics. The characteristics of biodiesel can not be fully used by diesel engines because it doesn’t meet the standards so that its characteristics need to be improved. As for utilizing it, it must be blended with diesel oil. The purpose of this study is to improve the physical and chemical properties of biodiesel, knowing the percentage of biodiesel volume from used cooking oil with diesel oil so that it can be known the optimal ratio of biodiesel with diesel oil which is close to diesel fuel specifications. Characteristics as variables in this paper are density, kinematic viscosity, pour point, and flash point of the specified mixture. The results show that the kinematic viscosity and density of the biodiesel-diesel mixture increase as the biodiesel mixture increases. Mixtures with higher biodiesel content have higher flash points. Mixing diesel with used cooking oil biodiesel may be of no use compared to diesel, but it can help in adjusting the viscosity, density, pour point, and flash point values according to applicable regulations.


  • Open Access

    PEMURNIAN BIOETHANOL DENGAN METODE DISTILASI AZEOTROP

    by Tun Sriana

    Abstrak- Bioethanol merupakan salah satu sumber energi alternatif yang sangat berpeluang untuk dikembangkan di Indonesia. Selain sebagai bahan baku alam yang dapat diperbaharui dan bersifat ramah lingkungan, bioethanol juga dapat dimanfaatkan sebagai bahan bakar substitutif maupun aditif pada bahan bakar fosil. Namun kenyataannya bioethanol hasil fermentasi hanya mempunyai kadar ethanol sebesar 10-15%, sedangkan untuk dapat digunakan sebagai bahan bakar atau bahan substitusi bioethanol harus mempunyai kemurnian mencapai 99,5%.  Dalam proses pemurniannya, air yang terdapat pada bioethanol akan membuat campuran azeotrop sehingga sulit dipisahkan dengan proses distilasi biasa. Salah satu metode pemisahan untuk memisahkan campuran azeotrop adalah dengan menggunakan metode distilasi azeotrop. Pada distilas ini akan ditambahkan entrainer yaitu zat yang berperan mengubah volatilitas relatif komponen kunci. Untuk menaikan kadar bioethanol dan mengetahui pengaruh entrainer pada distilasi azeotrop digunakan dua jenis entrainer yaitu benzene dan n-heptane. Dari hasil penelitian didapatkan bahwa benzene yang mempunyai gugus aromatik dapat menaikan kadar ethanol lebih baik dibadingkan dengan n-heptane dan cyclohexane.         Keywords: bioethanol, distilasi azeotrop, entrainer, benzene, n-heptane


  • Novel benzimidazole salts for lithium ion battery electrolytes: effects of substituents

    by T. Sriana, E. G. Leggesse, J. C. Jiang

    In this paper, we report on our effort to design a novel lithium salt derived from bis(trifluoroborane)benzimidazolide by using density functional theory (DFT) calculations. The effects of different substituents are investigated with respect to ion pair dissociation energies and intrinsic anion oxidation potential of the molecules. Based on our calculations, we have found that ion pair dissociation energies and intrinsic anion oxidation potentials of the anions are mainly affected by the position and the type of substituents introduced into the parent structure. Compared to –CH3, substitution at the C2 position of the parent bis(trifluoroborane)benzimidazole (BTB−) by –CF3 results in an increase in anion oxidation stability. However, we observed a negligible change in the intrinsic anion oxidation potential as the length of the fluoroalkyl group increased to –C2F5. The most promising anions are generated by considering double-substitution at C2 and C5 positions. Among the possible anions, bis(trifluoroborane)-5-nitro-2-(trifluoromethyl) benzimidazolide (BTNTB−), with the calculated intrinsic anion oxidation potential of 5.50 V vs. Li+/Li, can be considered as a potential candidate for high voltage Li-ion batteries.