Boron distribution between metal and slag during melting of metalized siderite concentrate in electric furnace
Open Access
- 8 November 2025
- journal article
- Published by National University of Science and Technology MISiS in Izvestiya. Ferrous Metallurgy
- Vol. 68 (5) , 495-505
Abstract
The Ural metallurgical enterprises compensate for the deficit of iron ore raw materials by supplying materials from Central Russia, the Kola Peninsula and Kazakhstan. Carbonate iron ores (siderites) of the Bakalskoye deposit are poor ores and, despite large reserves (about 1 billion tons), are not in great demand among metallurgists due to their low quality (low iron content and high magnesium content). The prospects for developing the Bakalskoye deposit depend on the availability of new technologies for processing siderites. There is a technology for processing poor iron ores using the coke-free metallurgy method, including reducing roasting in a rotary kiln, grinding and magnetic separation to obtain a highly metallized product suitable for steelmaking. Laboratory studies and industrial tests confirmed its suitability for processing siderites. A modernized technology for processing siderites is proposed, in which the operations of grinding and magnetic separation are excluded, and the product of reducing roasting in a rotary kiln is loaded hot into an electric furnace for separating melting. The process is carried out in the presence of colemanite containing boric anhydride to obtain liquid slag. During melting, part of the boron passes into the metal melt. By means of thermodynamic modeling, an assessment of the distribution of boron between the metal and slag as a result of separating melting is carried out. With a content of 5 and 10 % of colemanite in the charge, depending on the proportion of carbon, up to 60 % of boron passes into the metal. Such metal can be used as a ligature for obtaining boron-containing steel or cast iron. When bubbling the metal melt with oxygen, boron content can be reduced to 0.0001 %.Keywords
This publication has 10 references indexed in Scilit:
- Evaluating the efficiency of metallized siderite concentrate electric meltingIzvestiya. Ferrous Metallurgy, 2023
- Effect of boric anhydride on viscosity of slags used in electric melting of metallized siderite concentrateIzvestiya. Ferrous Metallurgy, 2023
- Effect of calcined colemanite addition on properties of porcelain tileJournal of the Australian Ceramic Society, 2021
- Influence of boron modification and cooling conditions during solidification on structural and phase state of heat- and wear-resistant white cast ironIzvestiya. Ferrous Metallurgy, 2019
- Тhe Study of the Process of Metal-Thermal Reduction of Boron from the Slag of the System CaO-SiO2-MgO-Al2O3-B2O3Materials Science Forum, 2019
- Boron effect on processing properties of middle-carbon structural steels of the common product rangeReporter of the Priazovskyi State Technical University. Section: Technical sciences, 2018
- THE EFFECT OF THE CHEMICAL COMPOSITION ON THE WORKING LAYER PROPERTIES OF CENTRIFUGALLY CAST INDEFINITE CHILL ROLLSVestnik of Nosov Magnitogorsk State Technical University, 2016
- Influence of B2O3 on Viscosity of High Ti-bearing Blast Furnace SlagISIJ International, 2012
- Enrichment of reduced siderite ore to produce concentrate for electrosteel smeltingSteel in Translation, 2011
- Effect of B2O3 on Melting Temperature, Viscosity and Desulfurization Capacity of CaO–based Refining FluxISIJ International, 2011