The purity evolution of Ti3AlC2 MAX phase synthesized by mechanochemical route: The effect of Al content and high‐temperature annealing
Authors:
Open Access
- 13 November 2023
- journal article
- research article
- Published by Wiley in Engineering Reports
- Vol. 6 (8)
Abstract
This study explores the effects of excess Al and annealing at high temperature on the purity of Ti3AlC2 MAX phase synthesized by the mechanochemical route. In this regard, a constant stoichiometric ratio of Ti: Al: C = 3: 1: 2 along with three blends of nonstoichiometric ratios with excess Al (Ti: Al: C = 3: X: 2, X = 1.1, 1.2, and 1.5) were ball milled. Then, to examine the annealing at high‐temperature effects, the compacted ball‐milled powders were heated at 900 and 1200°C for 1 h. The phase identification revealed that 10 h of ball milling caused a reaction between the elemental powders, and Ti3AlC2 and TiC were formed. The mechanism of the reaction during the high‐energy ball milling process is assigned to a mechanically induced self‐propagating reaction. Addition of excess Al to primary powders caused to increase the purity of Ti3AlC2 significantly. Furthermore, annealing at high temperature leading to complete reactions of the ball‐milled powders and increased Ti3AlC2 purity. The maximum Ti3AlC2 content of 88% was obtained of initial powder of Ti: Al: C = 3: 1.2: 2 ratio after annealing at 1200°C.Keywords
This publication has 31 references indexed in Scilit:
- Elastic and Mechanical Properties of the MAX PhasesAnnual Review of Materials Research, 2011
- TiC/Ti3SiC2 composite prepared by mechanical alloyingInternational Journal of Refractory Metals and Hard Materials, 2009
- Synthesis of Ti3AlC2 ceramic by high-energy ball milling of elemental powders of Ti, Al and CJournal of Materials Processing Technology, 2009
- Fabrication of High-Content Ti3AlC2 Powders by Mechanical AlloyingKey Engineering Materials, 2008
- Synthesis and microstructure of Ti3AlC2 by mechanically activated sintering of elemental powdersCeramics International, 2007
- Effect of Al addition on phase purity of Ti3Si(Al)C2 synthesized by mechanical alloyingJournal of Materials Processing Technology, 2007
- Mechanical Behavior of Ti3AlC2 Prepared by Pulse Discharge Sintering MethodMATERIALS TRANSACTIONS, 2007
- Mechanical‐Alloying‐Assisted Synthesis of Ti 3 SiC 2 PowderJournal of the American Ceramic Society, 2002
- Synthesis of Ternary Titanium Aluminum Carbides Using Self‐Propagating High‐Temperature Synthesis TechniqueJournal of the American Ceramic Society, 2001
- Synthesis and Characterization of Ti 3 AlC 2Journal of the American Ceramic Society, 2000