A shape memory alloy actuated release device using non-self-locking thread
- 1 November 2021
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (11) , 115107
Abstract
This paper proposes a novel non-explosive and resettable release device driven by shape memory alloy (SMA), which can replace the commonly used pyrotechnic device. In the scheme, a flywheel nut with bidirectional thread is connected with two screws through the non-self-locking thread, and the target adapters are fixed with the two screws and then locked into a hole by the flywheel nut. When unlocking, the offset SMA actuator releases the flywheel nut by triggering the pulley assembly and multi-level levers. Under the pulling force of the pre-tightening load of the screws, the flywheel nut rotates at high speed to unlock the screws, thus releasing the target adapters. After separation, the device can be quickly reset with the reset tool without replacing any parts. The prototype of the release device is fabricated and tested; according to the performance test results, the device can bear the maximum bi-directional preload of 10 kN and the average unlocking force is 9.73 N. The unlocking time decreases with the increase in driving voltage, and the average unlocking response time is 342 ms under 9 V voltage. Furthermore, the actuator can function well with a lifetime of more than 50 cycles. It is concluded that this scheme has potential advantages to replace the traditional non-reusable explosive driving device.Keywords
Funding Information
- National Natural Science Foundation of China (52005125)
- Fundamental Research Funds for the Central Universities (5710050921)
This publication has 19 references indexed in Scilit:
- Research on a low-impact unlocking trigger device of heavy load based on shape memory alloy fiberAdvances in Mechanical Engineering, 2017
- Detailed design of an SMA-actuated self-locking device for rotary feed structureSmart Materials and Structures, 2016
- Design and Experimental Validation of Compact, Quick-Response Shape Memory Alloy Separation DeviceJournal of Mechanical Design, 2013
- Structural design of morphing trailing edge actuated by SMAFrontiers of Mechanical Engineering, 2013
- Development of a non-explosive release actuator using shape memory alloy wireReview of Scientific Instruments, 2013
- Design equations for binary shape memory actuators under arbitrary external forcesJournal of Intelligent Material Systems and Structures, 2012
- Shape memory alloy (SMA) based non-explosive separation actuator (NEA) with a redundant functionInternational Journal of Precision Engineering and Manufacturing, 2011
- Ultimate load and release time controllable non-explosive separation device using a shape memory alloy actuatorJournal of Mechanical Science and Technology, 2011
- Effect of training conditions and extended thermal cycling on nitinol two-way shape memory behaviorSmart Materials and Structures, 1995
- Design of Shape Memory Alloy ActuatorsJournal of Mechanical Design, 1992