An Investigation on Diagnosis-Based Power Switch Lifetime Extension Strategies for Three-Phase Inverters
- 30 October 2018
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 55 (2) , 2064-2075
Abstract
Fault diagnosis and failure prognosis of power electronics systems are essential for various mission critical applications, where safety, continuity, and survivability of the system are of paramount importance. With the recent advances in power device failure precursor identification and lifetime estimation, it is possible to extend the lifetime of the power devices, and thereby converters through secondary control schemes. The essence of the lifetime extension strategies relies on either reducing the power loss on the degraded device(s) and shifting it to other parts, or decreasing the total power loss of the converter. As the power converters are optimized for efficiency and total harmonic distortion (THD) requirements, these secondary control strategies can result in operations above the design limits. This paper proposes a hybrid secondary lifetime extension control scheme for three-phase inverters based on the identified failure precursors, which dynamically changes the modulation scheme and adjusts the switching frequency. In the content of this paper, the tradeoff between the THD and achievable lifetime extension is addressed, and a control algorithm is proposed, which maximizes the lifetime with feasible lowest THD.Keywords
Funding Information
- TXACE/SRC (1836.154)
- National Science Foundation (1454311)
This publication has 41 references indexed in Scilit:
- Survey on Fault-Tolerant Techniques for Power Electronic ConvertersIEEE Transactions on Power Electronics, 2014
- Multiobjective Design Optimization of IGBT Power Modules Considering Power Cycling and Thermal CyclingIEEE Transactions on Power Electronics, 2014
- Physics-of-Failure, Condition Monitoring, and Prognostics of Insulated Gate Bipolar Transistor Modules: A ReviewIEEE Transactions on Power Electronics, 2014
- State Detection of Bond Wires in IGBT Modules Using Eddy Current Pulsed ThermographyIEEE Transactions on Power Electronics, 2013
- Characterization of high-voltage IGBT module degradations under PWM power cycling test at high ambient temperatureMicroelectronics Reliability, 2010
- The Active NPC Converter and Its Loss-Balancing ControlIEEE Transactions on Industrial Electronics, 2005
- Selected failure mechanisms of modern power modulesMicroelectronics Reliability, 2002
- Failure criteria for long term Accelerated Power Cycling Test linked to electrical turn off SOA on IGBT module. A 4000 hours test on 1200A–3300V module with AlSiC base plateMicroelectronics Reliability, 2000
- Simple analytical and graphical methods for carrier-based PWM-VSI drivesIEEE Transactions on Power Electronics, 1999
- A high-performance generalized discontinuous PWM algorithmIEEE Transactions on Industry Applications, 1998