Resistance of polypropylene fibered mortar to elevated temperature under different cooling regimes
Open Access
- 1 January 2019
- journal article
- research article
- Published by Pontificia Universidad Catolica de Chile in Revista de la construcción
- Vol. 18 (2) , 386-397
Abstract
DOI: 10.7764/RDLC.18.2.386 Behaviour of construction materials i.e. steel, concrete and mortar under elevated temperature is important. In the study, the variations in mass loss, and strengths of polypropylene fiber reinforced mortar subjected to elevated temperatures were examined. Mortar was made with CEM I 42.5R Portland cement, monofilament polypropylene fiber, fine aggregate and drinkable water. The sand-cement and water-cement ratio were chosen 3:1 and 1:2 for all mixtures, respectively. Mixes containing 0, 0.1, 0.2 and 0.3% polypropylene fiber in volume of solid matter of mixture were prepared. Mortars were exposed to 100, 200, 400, 600 and 800°C temperatures and cooled down 23±2°C in air and water. There was a difference between the temperatures at which the important reductions observed for flexural tensile and compressive strength. Significant reduction was observed at 400°C for compressive strength and while it was 200°C for flexural strength. No difference was observed between air cooling and water cooling regimes up to 600°C; however, at 800°C the residual compressive and flexural strength of water cooled mortar was about 40% of the air cooled mortar. Mortar containing polypropylene fiber presented better behaviour to elevated temperature in terms of relative residual strengths up to 400°C.Keywords
This publication has 27 references indexed in Scilit:
- Effect of aggregate size and inclusion of polypropylene and steel fibers on explosive spalling and pore pressure in ultra-high-performance concrete (UHPC) at elevated temperatureCement and Concrete Composites, 2019
- Residual compressive strength of fire‐damaged mortar after post‐fire‐air‐curingFire and Materials, 2010
- Behaviour of fiber reinforced concrete columns in fireComposite Structures, 2010
- Effect of short fibers on residual permeability and mechanical properties of hybrid fibre reinforced high strength concrete after heat expositionCement and Concrete Research, 2006
- How do polypropylene fibers improve the spalling behavior of in-situ concrete?Cement and Concrete Research, 2006
- Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperaturesCement and Concrete Research, 2006
- Mechanical properties and microstructure of high strength concrete containing polypropylene fibres exposed to temperatures up to 200 °CCement and Concrete Research, 2005
- Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperaturesCement and Concrete Research, 2004
- Compressive strength–color change relation in mortars at high temperatureCement and Concrete Research, 2004
- Post-fire behavior of bond between high strength pozzolanic concrete and reinforcing steelConstruction and Building Materials, 2004