A Compact 17.6 kW Single-/22 kW Three-Phase Compatible EV Charger: Analysis of Active Power Decoupling, Wide Voltage Range Operation
- 14 January 2025
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (8) , 8028-8038
Abstract
In this article, a single- and three-phase compatible battery charger with active power decoupling (APD) is proposed. The two-stage system consists of CLLC resonant converter for dc–dc converter and integration of two-level inverter (three-phase) and three-phase interleaved totem-pole inverter (single-phase) for ac–dc converter. Through the simple relay operation, the ac–dc converter switches the operations according to the grid phase. By applying the active power decoupling technique to reduce the used capacitance and substitute to film capacitor, it solves the problems of lifespan and stability caused by using electrolytic capacitors. The ac–dc converter variably control the dc link voltage to maximize the battery voltage range of the DCX region with good efficiency characteristics for the dc–dc converter. In addition, the CLLC resonant converter performs the seamless control combining with frequency control and phase-shift control by using only one PI controller. A 17.6/22 kW(1Ø/3Ø), 2.18 kW/L prototype is implemented to validate the proposed concept and demonstrated 95.77% and 94.98% peak efficiency for three- and single-phase, respectively.Keywords
Funding Information
- Korea government (20212020800020)
This publication has 25 references indexed in Scilit:
- A review on single-phase, single-stage OBC topologies for EVs with 48 V powertrains2021
- A Review of Bidirectional On-Board Chargers for Electric VehiclesIEEE Access, 2021
- A 300-kHz 6.6-kW SiC Bidirectional LLC Onboard ChargerIEEE Transactions on Industrial Electronics, 2019
- High-Frequency PCB Winding Transformer With Integrated Inductors for a Bi-Directional Resonant ConverterIEEE Transactions on Power Electronics, 2018
- A High-Efficiency High-Density Wide-Bandgap Device-Based Bidirectional On-Board ChargerIEEE Journal of Emerging and Selected Topics in Power Electronics, 2018
- High-Efficiency High-Density Critical Mode Rectifier/Inverter for WBG-Device-Based On-Board ChargerIEEE Transactions on Industrial Electronics, 2017
- A Closer Look at the On-Board Charger: The development of the second-generation module for the Chevrolet VoltIEEE Electrification Magazine, 2017
- Implementation of a 3.3-kW DC–DC Converter for EV On-Board Charger Employing the Series-Resonant Converter With Reduced-Frequency-Range ControlIEEE Transactions on Power Electronics, 2016
- Comparison of Active Power Decoupling Methods for High-Power-Density Single-Phase Inverters Using Wide-Bandgap FETs for Google Little Box ChallengeIEEE Journal of Emerging and Selected Topics in Power Electronics, 2016
- High-Efficiency Hybrid Full-Bridge–Half-Bridge Converter With Shared ZVS Lagging Leg and Dual Outputs in SeriesIEEE Transactions on Power Electronics, 2013