Abstract
Appropriately incorporating microfiber into high-strength concrete can prevent and mitigate cracking. However, a clear understanding of how polypropylene (PP) microfibers contribute to crack resistance and developing effective analytical models remains crucial. This study determined the appropriate microfiber volume fraction for PP fiber-reinforced concrete (PP-FRC) based on fundamental mechanical tests. Subsequently, a control group was established with half the microfiber content of the initially determined volume fraction. Six PP-FRC and three conventional reinforced concrete beams were designed. The study then evaluated the bending performance of PP-FRC beams under three-point bending loads from various perspectives, including crack propagation, crack width, primary crack length, deformation coordination, loading process characteristics, load-deflection curves, and ductility. Finally, numerical simulations were employed to analyze and validate the improvement in the bending performance of the experimental beams due to the incorporation of PP microfibers. The research results indicate that PP microfibers significantly reduce the width of main cracks, increase the corresponding load of crack width, promote multiple crack cracking, and effectively control crack development. The strain distribution of concrete in the tensile zone of PP-FRC beams is more uniform, which improves the coordination ability between concrete and steel deformation and ultimate strain. Numerical simulation successfully reproduced PP-FRC beams' three-point bending cracking behavior by establishing a geometric model of PP microfibers. Although there were deviations in the cracking load simulation, other characteristics were in good agreement with experiments. PP microfibers are mainly subjected to local tension at the crack site, which is different from the overall stress of rigid fibers, and can delay the damage of the steel-concrete interface and improve structural performance.
Funding Information
  • National Natural Science Foundation of China (51178361)
  • Fundamental Research Funds for the Central Universities (2023‐vb‐009)

This publication has 53 references indexed in Scilit: