Ming Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ming Zhou has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Huayi Wang
School of Transportation and Logistics Engineering Wuhan University of Technology Wuhan People's Republic of China
8 shared publications - Chao Wu
School of Transportation and Logistics Engineering Wuhan University of Technology Wuhan People's Republic of China
6 shared publications Xiongjun He
5 shared publicationsBingyan Wei
4 shared publications- Bingyan Wei
School of Transportation and Logistics Engineering, Wuhan University of Technology Wuhan China
3 shared publications - Xiongjun He
School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China
3 shared publications
Latest Publications
- 22 June 2026
- Published by Elsevier in Journal of Building Engineering
- Vol. 128
Tensile behavior of hybrid fiber-reinforced high-strength concrete based on a 3D mesoscopic model
- 22 June 2026
- Published by Elsevier in Journal of Building Engineering
- Vol. 128
Tensile behavior of hybrid fiber-reinforced high-strength concrete based on a 3D mesoscopic model
- 17 November 2025
- Published by Elsevier in Composite Structures
- Vol. 377
Fatigue bond behavior between basalt fiber reinforced polymer bars and steel fiber reinforced concrete
- 17 November 2025
- Published by Elsevier in Composite Structures
- Vol. 377
Fatigue bond behavior between basalt fiber reinforced polymer bars and steel fiber reinforced concrete
- 25 June 2025
- Published by Wiley in Structural Concrete
Effect of polypropylene microfibers on the flexural performance of RC beams: Experimental, numerical and analytical investigations
Appropriately incorporating microfiber into high-strength concrete can prevent and mitigate cracking. However, a clear understanding of how polypropylene (PP) microfibers contribute to crack resistance and developing effective analytical models remains crucial. This study determined the appropriate microfiber volume fraction for PP fiber-reinforced concrete (PP-FRC) based on fundamental mechanical tests. Subsequently, a control group was established with half the microfiber content of the initially determined volume fraction. Six PP-FRC and three conventional reinforced concrete beams were designed. The study then evaluated the bending performance of PP-FRC beams under three-point bending loads from various perspectives, including crack propagation, crack width, primary crack length, deformation coordination, loading process characteristics, load-deflection curves, and ductility. Finally, numerical simulations were employed to analyze and validate the improvement in the bending performance of the experimental beams due to the incorporation of PP microfibers. The research results indicate that PP microfibers significantly reduce the width of main cracks, increase the corresponding load of crack width, promote multiple crack cracking, and effectively control crack development. The strain distribution of concrete in the tensile zone of PP-FRC beams is more uniform, which improves the coordination ability between concrete and steel deformation and ultimate strain. Numerical simulation successfully reproduced PP-FRC beams' three-point bending cracking behavior by establishing a geometric model of PP microfibers. Although there were deviations in the cracking load simulation, other characteristics were in good agreement with experiments. PP microfibers are mainly subjected to local tension at the crack site, which is different from the overall stress of rigid fibers, and can delay the damage of the steel-concrete interface and improve structural performance.
- 25 June 2025
- Published by Wiley in Structural Concrete
Effect of polypropylene microfibers on the flexural performance of RC beams: Experimental, numerical and analytical investigations
Appropriately incorporating microfiber into high-strength concrete can prevent and mitigate cracking. However, a clear understanding of how polypropylene (PP) microfibers contribute to crack resistance and developing effective analytical models remains crucial. This study determined the appropriate microfiber volume fraction for PP fiber-reinforced concrete (PP-FRC) based on fundamental mechanical tests. Subsequently, a control group was established with half the microfiber content of the initially determined volume fraction. Six PP-FRC and three conventional reinforced concrete beams were designed. The study then evaluated the bending performance of PP-FRC beams under three-point bending loads from various perspectives, including crack propagation, crack width, primary crack length, deformation coordination, loading process characteristics, load-deflection curves, and ductility. Finally, numerical simulations were employed to analyze and validate the improvement in the bending performance of the experimental beams due to the incorporation of PP microfibers. The research results indicate that PP microfibers significantly reduce the width of main cracks, increase the corresponding load of crack width, promote multiple crack cracking, and effectively control crack development. The strain distribution of concrete in the tensile zone of PP-FRC beams is more uniform, which improves the coordination ability between concrete and steel deformation and ultimate strain. Numerical simulation successfully reproduced PP-FRC beams' three-point bending cracking behavior by establishing a geometric model of PP microfibers. Although there were deviations in the cracking load simulation, other characteristics were in good agreement with experiments. PP microfibers are mainly subjected to local tension at the crack site, which is different from the overall stress of rigid fibers, and can delay the damage of the steel-concrete interface and improve structural performance.
- 23 March 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 105
Mesoscale discrete analysis of mechanical properties of steel fiber reinforced concrete
- 23 March 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 105
Mesoscale discrete analysis of mechanical properties of steel fiber reinforced concrete
- 29 August 2024
- Published by Elsevier in Construction and Building Materials
3D mesoscale discrete element modeling of hybrid fiber-reinforced concrete
- 29 August 2024
- Published by Elsevier in Construction and Building Materials
3D mesoscale discrete element modeling of hybrid fiber-reinforced concrete
- Open Access
- 31 January 2024
- Published by Wiley in Structural Concrete
Study on bending failure and crack characteristics in ductile fiber-reinforced concrete beams
In this study, we designed six polypropylene fiber-reinforced concrete (PP-FRC) beams and three reinforced concrete (RC) beams for experimental studies. Then, we analyzed the effects of incorporating PP fibers on the cracking performance of PP-FRC beams from the perspectives of load-displacement response, crack distribution, crack depth, crack width, crack spacing, and deformation coordination. The research results showed that the cracking load and number of cracks were positively correlated with the volume ratio of PP fibers, while the maximum crack width, average crack spacing, and average crack depth were negatively correlated with the volume ratio of PP fibers. Due to the bridging effect of fibers, the PP-FRC beam body and reinforcement could deform in a coordinated manner within a specific loading range after cracking, which increased the deformation coordination ability between the body and reinforcement. In this study, the cracking mechanism of PP-FRC beams was investigated. Firstly, the formula for calculating the cracking moment of PP-FRC beams was derived from the perspective of equivalent bending tensile strength. Then, based on the fiber bridging law and the bond strength between PP-FRC and reinforcement, theoretical formulas were proposed to predict the average crack spacing and maximum crack width of PP-FRC beams. Finally, through comparison, it was found that the proposed formulas could be used for characteristic crack prediction.
- 31 January 2024
- Published by Wiley in Structural Concrete
Open AccessStudy on bending failure and crack characteristics in ductile fiber-reinforced concrete beams
In this study, we designed six polypropylene fiber-reinforced concrete (PP-FRC) beams and three reinforced concrete (RC) beams for experimental studies. Then, we analyzed the effects of incorporating PP fibers on the cracking performance of PP-FRC beams from the perspectives of load-displacement response, crack distribution, crack depth, crack width, crack spacing, and deformation coordination. The research results showed that the cracking load and number of cracks were positively correlated with the volume ratio of PP fibers, while the maximum crack width, average crack spacing, and average crack depth were negatively correlated with the volume ratio of PP fibers. Due to the bridging effect of fibers, the PP-FRC beam body and reinforcement could deform in a coordinated manner within a specific loading range after cracking, which increased the deformation coordination ability between the body and reinforcement. In this study, the cracking mechanism of PP-FRC beams was investigated. Firstly, the formula for calculating the cracking moment of PP-FRC beams was derived from the perspective of equivalent bending tensile strength. Then, based on the fiber bridging law and the bond strength between PP-FRC and reinforcement, theoretical formulas were proposed to predict the average crack spacing and maximum crack width of PP-FRC beams. Finally, through comparison, it was found that the proposed formulas could be used for characteristic crack prediction.
- Top Cited PapersOpen Access
- 26 January 2024
- Published by Elsevier in Construction and Building Materials
Mechanical properties and microstructure of ITZs in steel and polypropylene hybrid fiber-reinforced concrete
- 26 January 2024
- Published by Elsevier in Construction and Building Materials
Top Cited PapersOpen AccessMechanical properties and microstructure of ITZs in steel and polypropylene hybrid fiber-reinforced concrete