Bingyan Wei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bingyan Wei has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Xiongjun He
School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China
7 shared publications - Chao Wu
School of Transportation and Logistics Engineering Wuhan University of Technology Wuhan People's Republic of China
5 shared publications - Huayi Wang
School of Transportation and Logistics Engineering Wuhan University of Technology Wuhan People's Republic of China
5 shared publications - Jia He
Department of the Built Environment Eindhoven University of Technology Eindhoven The Netherlands
4 shared publications - Ming Zhou
School of Transportation and Logistics Engineering Wuhan University of Technology Wuhan People's Republic of China
3 shared publications - Weiwei Wu
School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China
3 shared publications
Latest Publications
- 22 June 2026
- Published by Elsevier in Journal of Building Engineering
- Vol. 128
Tensile behavior of hybrid fiber-reinforced high-strength concrete based on a 3D mesoscopic model
- 22 June 2026
- Published by Elsevier in Journal of Building Engineering
- Vol. 128
Tensile behavior of hybrid fiber-reinforced high-strength concrete based on a 3D mesoscopic model
- 2 September 2025
- Published by Elsevier in Structures
- Vol. 80
Experimental and numerical analysis of flexural behavior of reinforced high-strength concrete beams with hybrid fibers
- 2 September 2025
- Published by Elsevier in Structures
- Vol. 80
Experimental and numerical analysis of flexural behavior of reinforced high-strength concrete beams with hybrid fibers
- 25 June 2025
- Published by Wiley in Structural Concrete
Effect of polypropylene microfibers on the flexural performance of RC beams: Experimental, numerical and analytical investigations
Appropriately incorporating microfiber into high-strength concrete can prevent and mitigate cracking. However, a clear understanding of how polypropylene (PP) microfibers contribute to crack resistance and developing effective analytical models remains crucial. This study determined the appropriate microfiber volume fraction for PP fiber-reinforced concrete (PP-FRC) based on fundamental mechanical tests. Subsequently, a control group was established with half the microfiber content of the initially determined volume fraction. Six PP-FRC and three conventional reinforced concrete beams were designed. The study then evaluated the bending performance of PP-FRC beams under three-point bending loads from various perspectives, including crack propagation, crack width, primary crack length, deformation coordination, loading process characteristics, load-deflection curves, and ductility. Finally, numerical simulations were employed to analyze and validate the improvement in the bending performance of the experimental beams due to the incorporation of PP microfibers. The research results indicate that PP microfibers significantly reduce the width of main cracks, increase the corresponding load of crack width, promote multiple crack cracking, and effectively control crack development. The strain distribution of concrete in the tensile zone of PP-FRC beams is more uniform, which improves the coordination ability between concrete and steel deformation and ultimate strain. Numerical simulation successfully reproduced PP-FRC beams' three-point bending cracking behavior by establishing a geometric model of PP microfibers. Although there were deviations in the cracking load simulation, other characteristics were in good agreement with experiments. PP microfibers are mainly subjected to local tension at the crack site, which is different from the overall stress of rigid fibers, and can delay the damage of the steel-concrete interface and improve structural performance.
- 25 June 2025
- Published by Wiley in Structural Concrete
Effect of polypropylene microfibers on the flexural performance of RC beams: Experimental, numerical and analytical investigations
Appropriately incorporating microfiber into high-strength concrete can prevent and mitigate cracking. However, a clear understanding of how polypropylene (PP) microfibers contribute to crack resistance and developing effective analytical models remains crucial. This study determined the appropriate microfiber volume fraction for PP fiber-reinforced concrete (PP-FRC) based on fundamental mechanical tests. Subsequently, a control group was established with half the microfiber content of the initially determined volume fraction. Six PP-FRC and three conventional reinforced concrete beams were designed. The study then evaluated the bending performance of PP-FRC beams under three-point bending loads from various perspectives, including crack propagation, crack width, primary crack length, deformation coordination, loading process characteristics, load-deflection curves, and ductility. Finally, numerical simulations were employed to analyze and validate the improvement in the bending performance of the experimental beams due to the incorporation of PP microfibers. The research results indicate that PP microfibers significantly reduce the width of main cracks, increase the corresponding load of crack width, promote multiple crack cracking, and effectively control crack development. The strain distribution of concrete in the tensile zone of PP-FRC beams is more uniform, which improves the coordination ability between concrete and steel deformation and ultimate strain. Numerical simulation successfully reproduced PP-FRC beams' three-point bending cracking behavior by establishing a geometric model of PP microfibers. Although there were deviations in the cracking load simulation, other characteristics were in good agreement with experiments. PP microfibers are mainly subjected to local tension at the crack site, which is different from the overall stress of rigid fibers, and can delay the damage of the steel-concrete interface and improve structural performance.
- Open Access
- 12 October 2024
- Published by Wiley in Structural Concrete
- Vol. 26 (1) , 952-971
Finite element analysis of ductility and flexural capacity of FRP and steel bars hybrid reinforced concrete beams
To study the flexural behavior of hybrid reinforced concrete (hybrid‐RC) beams with FRP and steel bars, this paper used ABAQUS finite element (FE) software to model and nonlinear analyze the hybrid‐RC beams and investigate the effects of effective reinforcement ratio, concrete strength, and FRP bars type on the flexural behavior of hybrid‐RC beams. In addition, the FRP bars stress, flexural bearing capacity, and ductility formulas for hybrid‐RC beams were fitted based on the FE results, and existing literature data were used to verify their accuracy. The FE model results indicated that the effective reinforcement ratio, FRP bars type, and concrete strength significantly impacted the flexural bearing capacity and deformation performance of hybrid‐RC beams. Increasing the strength of concrete improved the flexural bearing capacity and ductility of hybrid‐RC beams; increasing the effective reinforcement ratio and the elastic modulus of FRP bars increased the flexural bearing capacity of the hybrid‐RC beams but decreased its ductility. In addition, the fitted FRP bars stress, flexural bearing capacity, and ductility calculation formulas can quickly and conveniently predict the flexural bearing capacity and ductility of hybrid‐RC beams.
- 12 October 2024
- Published by Wiley in Structural Concrete
- Vol. 26 (1) , 952-971
Open AccessFinite element analysis of ductility and flexural capacity of FRP and steel bars hybrid reinforced concrete beams
To study the flexural behavior of hybrid reinforced concrete (hybrid‐RC) beams with FRP and steel bars, this paper used ABAQUS finite element (FE) software to model and nonlinear analyze the hybrid‐RC beams and investigate the effects of effective reinforcement ratio, concrete strength, and FRP bars type on the flexural behavior of hybrid‐RC beams. In addition, the FRP bars stress, flexural bearing capacity, and ductility formulas for hybrid‐RC beams were fitted based on the FE results, and existing literature data were used to verify their accuracy. The FE model results indicated that the effective reinforcement ratio, FRP bars type, and concrete strength significantly impacted the flexural bearing capacity and deformation performance of hybrid‐RC beams. Increasing the strength of concrete improved the flexural bearing capacity and ductility of hybrid‐RC beams; increasing the effective reinforcement ratio and the elastic modulus of FRP bars increased the flexural bearing capacity of the hybrid‐RC beams but decreased its ductility. In addition, the fitted FRP bars stress, flexural bearing capacity, and ductility calculation formulas can quickly and conveniently predict the flexural bearing capacity and ductility of hybrid‐RC beams.
- Open Access
- 16 April 2024
- Published by Springer Nature in Materials and Structures
- Vol. 57 (4) , 1-18
Research on the flexural behavior of polypropylene fiber reinforced concrete beams with hybrid reinforcement of GFRP and steel bars
To study the flexural behavior of glass fiber (GFRP) bars and steel bars hybrid reinforced polypropylene fiber concrete (Hybrid-PFRC) beams, one GFRP-PFRC beam, one Steel-PFRC beam, and five Hybrid-PFRC beams were designed and fabricated. The effects of the different area ratio ( $${{A_{f} } \mathord{\left/ {\vphantom {{A_{f} } {A_{s} }}} \right. \kern-0pt} {A_{s} }}$$ ) of GFRP to steel bars and polypropylene fiber (PP) volume fraction on the flexural behavior of Hybrid-PFRC beams were investigated through experiments. The research results indicated that the Hybrid-PFRC beams’ load–deflection curves exhibited trilinear characteristics with specimen cracking and steel bars yielding as turning points. As $${{A_{f} } \mathord{\left/ {\vphantom {{A_{f} } {A_{s} }}} \right. \kern-0pt} {A_{s} }}$$ increased, the flexural bearing capacity of Hybrid-PFRC beams increased, the deflection decreased, the crack spacing and width decreased, and the ductility decreased. The addition of PP did not significantly improve the flexural bearing capacity and cracking moment of Hybrid-PFRC beams, but it greatly enhanced the ductility of the beam. Moreover, PP had good advantages in controlling crack propagation in the beam. The article also used the theoretical model to predict and analyze the flexural behavior of Hybrid-PFRC beams. When predicting the maximum crack width of Hybrid-PFRC beams, when PP is not added to the beam, the bonding coefficient kb should be greater than 1.4; When PP is added to the beam, it is recommended that the bonding coefficient kb should not exceed 1.4.- 16 April 2024
- Published by Springer Nature in Materials and Structures
- Vol. 57 (4) , 1-18
Open AccessResearch on the flexural behavior of polypropylene fiber reinforced concrete beams with hybrid reinforcement of GFRP and steel bars
To study the flexural behavior of glass fiber (GFRP) bars and steel bars hybrid reinforced polypropylene fiber concrete (Hybrid-PFRC) beams, one GFRP-PFRC beam, one Steel-PFRC beam, and five Hybrid-PFRC beams were designed and fabricated. The effects of the different area ratio ( $${{A_{f} } \mathord{\left/ {\vphantom {{A_{f} } {A_{s} }}} \right. \kern-0pt} {A_{s} }}$$ ) of GFRP to steel bars and polypropylene fiber (PP) volume fraction on the flexural behavior of Hybrid-PFRC beams were investigated through experiments. The research results indicated that the Hybrid-PFRC beams’ load–deflection curves exhibited trilinear characteristics with specimen cracking and steel bars yielding as turning points. As $${{A_{f} } \mathord{\left/ {\vphantom {{A_{f} } {A_{s} }}} \right. \kern-0pt} {A_{s} }}$$ increased, the flexural bearing capacity of Hybrid-PFRC beams increased, the deflection decreased, the crack spacing and width decreased, and the ductility decreased. The addition of PP did not significantly improve the flexural bearing capacity and cracking moment of Hybrid-PFRC beams, but it greatly enhanced the ductility of the beam. Moreover, PP had good advantages in controlling crack propagation in the beam. The article also used the theoretical model to predict and analyze the flexural behavior of Hybrid-PFRC beams. When predicting the maximum crack width of Hybrid-PFRC beams, when PP is not added to the beam, the bonding coefficient kb should be greater than 1.4; When PP is added to the beam, it is recommended that the bonding coefficient kb should not exceed 1.4. - Open Access
- 4 December 2023
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 20
Experimental study on flexural behaviors of FRP and steel bars hybrid reinforced concrete beams
- 4 December 2023
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 20
Open AccessExperimental study on flexural behaviors of FRP and steel bars hybrid reinforced concrete beams
- Open Access
- 22 September 2023
- Published by Springer Nature in Research Square
Research on the flexural behaviors of polypropylene fiber reinforced concrete beams with hybrid GFRP and steel bars
To study the flexural behaviors of glass fiber (GFRP) bars and steel bars hybrid reinforced polypropylene fiber concrete (Hybrid-PFRC) beams, one GFRP-PFRC beam, one Steel-PFRC beam, and five Hybrid-PFRC beams were designed and fabricated. The effects of the different area ratio (\({{{A_f}} \mathord{\left/ {\vphantom {{{A_f}} {{A_s}}}} \right. \kern-0pt} {{A_s}}}\)) of GFRP to steel bars and polypropylene fiber (PP) volume fraction on the flexural behaviors of Hybrid-PFRC beams were investigated through experiments. The research results indicated that the Hybrid-PFRC beams’ load-deflection curves exhibited trilinear characteristics with specimen cracking and steel bars yielding as turning points. As \({{{A_f}} \mathord{\left/ {\vphantom {{{A_f}} {{A_s}}}} \right. \kern-0pt} {{A_s}}}\) increased, the flexural bearing capacity of Hybrid-PFRC beams increased, the deflection decreased, the crack spacing and width decreased, and the ductility decreased. The addition of PP did not significantly improve the flexural bearing capacity and cracking moment of Hybrid-PFRC beams, but it greatly enhanced the ductility of the beam. Moreover, PP had good advantages in controlling crack propagation in the beam. The article also used the theoretical model to predict and analyze the flexural behaviors of Hybrid-PFRC beams. When predicting the maximum crack width of Hybrid-PFRC beams, it was recommended to have a bonding coefficient kb of 2.2.- 22 September 2023
- Published by Springer Nature in Research Square
Open AccessResearch on the flexural behaviors of polypropylene fiber reinforced concrete beams with hybrid GFRP and steel bars
To study the flexural behaviors of glass fiber (GFRP) bars and steel bars hybrid reinforced polypropylene fiber concrete (Hybrid-PFRC) beams, one GFRP-PFRC beam, one Steel-PFRC beam, and five Hybrid-PFRC beams were designed and fabricated. The effects of the different area ratio (\({{{A_f}} \mathord{\left/ {\vphantom {{{A_f}} {{A_s}}}} \right. \kern-0pt} {{A_s}}}\)) of GFRP to steel bars and polypropylene fiber (PP) volume fraction on the flexural behaviors of Hybrid-PFRC beams were investigated through experiments. The research results indicated that the Hybrid-PFRC beams’ load-deflection curves exhibited trilinear characteristics with specimen cracking and steel bars yielding as turning points. As \({{{A_f}} \mathord{\left/ {\vphantom {{{A_f}} {{A_s}}}} \right. \kern-0pt} {{A_s}}}\) increased, the flexural bearing capacity of Hybrid-PFRC beams increased, the deflection decreased, the crack spacing and width decreased, and the ductility decreased. The addition of PP did not significantly improve the flexural bearing capacity and cracking moment of Hybrid-PFRC beams, but it greatly enhanced the ductility of the beam. Moreover, PP had good advantages in controlling crack propagation in the beam. The article also used the theoretical model to predict and analyze the flexural behaviors of Hybrid-PFRC beams. When predicting the maximum crack width of Hybrid-PFRC beams, it was recommended to have a bonding coefficient kb of 2.2.