The effect of amorphous Si3N4 nanoparticles and magnetized distilled water on the mechanical properties and infrared transmittance of α-Al2O3
Open Access
- 15 July 2025
- journal article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 25504
Abstract
This study resolves the inherent trade-off between fracture toughness and mid-infrared transparency in α-Al2O3 ceramics. A novel shear-stress thin-layer process with magnetic-field-assisted dispersion achieves uniform distribution of 0.1 wt% amorphous Si3N4 nanoparticles and MgO/La2O3 sintering aids using 2 wt% DL dispersant at pH 10. Post-annealing at 1200 °C enhances fracture toughness by 126% (3.4 ± 0.2 to 7.68 ± 0.3 MPa m1/2) while reducing hardness from 23.6 ± 0.8 GPa to 12.6 ± 0.5 GPa, confirming improved ductility. XRD analysis verifies compressive residual stress (- 1.60 ± 0.08 GPa) and lattice strain (- 0.49 ± 0.05%). FESEM/EDS reveals grain refinement from 402 ± 18 nm to 124 ± 6 nm with homogeneity index exceeding 0.93. These microstructural modifications enable 85.3 ± 0.5% mid-infrared transmittance between 3 and 6 μm, surpassing conventional transparent alumina by 41%. This approach establishes a scalable method for designing multifunctional ceramics with simultaneous mechanical resilience and optical performance.Keywords
All Related Versions
This publication has 101 references indexed in Scilit:
- Refractiveindex.info database of optical constantsScientific Data, 2024
- Investigation of the Densification Behavior of Alumina during Spark Plasma SinteringMaterials, 2022
- Amorphous Silicon Oxynitride-Based Powders Produced by Spray Pyrolysis from Liquid Organosilicon CompoundsMaterials, 2021
- Hardness and Indentation Fracture Toughness of Slip Cast Alumina and Alumina-Zirconia CeramicsMaterials, 2019
- Magnetic water treatment–A review of the latest approachesChemosphere, 2018
- Zeta Potential of Beta Zeolites: Influence of Structure, Acidity, pH, Temperature and ConcentrationMolecules, 2018
- Determination of Isoelectric Points and the Role of pH for Common Quartz Crystal Microbalance SensorsACS Applied Materials & Interfaces, 2013
- Infrared Characterization of Interfacial Si−O Bond Formation on Silanized Flat SiO2/Si SurfacesLangmuir, 2010
- Microhardness and fracture toughness of dental materials by indentation methodJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2005
- Vibrational spectra of trimethylsilanolSpectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 2004