MDMahdi Darabi

Mahdi Darabi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mahdi Darabi has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The effect of amorphous Si3N4 nanoparticles and magnetized distilled water on the mechanical properties and infrared transmittance of α-Al2O3

    by Mahdi Darabi, Ehsan Mohammad Sharifi, Reza Vafaei, Akbar Eshaghi, Mohammad Reza Loghman-Estarki

    This study resolves the inherent trade-off between fracture toughness and mid-infrared transparency in α-Al2O3 ceramics. A novel shear-stress thin-layer process with magnetic-field-assisted dispersion achieves uniform distribution of 0.1 wt% amorphous Si3N4 nanoparticles and MgO/La2O3 sintering aids using 2 wt% DL dispersant at pH 10. Post-annealing at 1200 °C enhances fracture toughness by 126% (3.4 ± 0.2 to 7.68 ± 0.3 MPa m1/2) while reducing hardness from 23.6 ± 0.8 GPa to 12.6 ± 0.5 GPa, confirming improved ductility. XRD analysis verifies compressive residual stress (- 1.60 ± 0.08 GPa) and lattice strain (- 0.49 ± 0.05%). FESEM/EDS reveals grain refinement from 402 ± 18 nm to 124 ± 6 nm with homogeneity index exceeding 0.93. These microstructural modifications enable 85.3 ± 0.5% mid-infrared transmittance between 3 and 6 μm, surpassing conventional transparent alumina by 41%. This approach establishes a scalable method for designing multifunctional ceramics with simultaneous mechanical resilience and optical performance.


  • Open Access

    The Effect of Amorphous Si₃N₄ Nanoparticles and Magnetized Distilled Water on the Mechanical Properties and Infrared Transmittance of α-Al₂O₃

    by Mahdi Darabi, Ehsan Mohammad Sharifi, Reza Vafaei, Akbar Eshaghi, Mohammad Reza Loghman-Estarki

    The objective of this study was to enhance the mechanical and optical properties of α-Al2O3 ceramics through the incorporation of amorphous Si3N4 nanoparticles, in conjunction with MgO and La2O3 sintering aids. Samples were fabricated using the shear stress-thin layer (S-T) method with slurry prepared in magnetized distilled water. The effects of dispersant concentration, slurry pH, and annealing treatment were systematically examined. The material's hardness, fracture toughness, Young's modulus, and infrared transmittance were evaluated using a combination of analytical methods, including hardness and toughness tests, X-ray diffraction (XRD), infrared spectroscopy (IR), and field-emission scanning electron microscopy (FESEM). The incorporation of 0.1 wt% Si₃N₄ and 2 wt% dispersant at a pH of 10 resulted in a reduction in hardness from 23.6 GPa to 16 GPa and an enhancement in fracture toughness from 3.4 MPa·m1/2 to 6.3 MPa·m1/2. Annealing at 1200°C for 4 hours led to a significant reduction in hardness to 12.6 GPa and an enhancement in toughness to 7.7 MPa·m1/2. The Young's modulus demonstrated a decrease from 403 gigapascals (GPa) to 230 GPa, indicating a reduction in brittleness. Optical analysis demonstrated that under optimal conditions, infrared transmittance reached 85% in the 3–6 µm range.

  • Open Access

    Effect of Amorphous Si₃N₄ Nanoparticles on the Infrared Transmittance of α-Al₂O₃

    by Mahdi Darabi, Ehsan Mohammad Sharifi, Reza Vafaie, Akbar Eshaghi, Mohammad Reza Loghman Estraki

    Introduction and Objectives: This study aims to enhance the optical properties of polycrystalline alumina by controlling grain growth and minimizing structural defects. To achieve this, the influence of amorphous silicon nitride (Si₃N₄) nanoparticles as a reinforcing agent, in conjunction with MgO and La₂O₃ as sintering aids, on the infrared transmittance of PA was investigated. Furthermore, the role of the dispersing agent in improving slurry homogeneity and particle distribution was evaluated.Materials and Methods: The composite materials were synthesized via a chemical precipitation process, wherein alumina powder was mixed with Si3N4 nanoparticles, magnesium nitrate, lanthanum nitrate, and a dispersing agent in an aqueous solution.Ultrasonic waves were employed to enhance particle dispersion, and the slurry pH was adjusted to 10 to stabilize the suspension.Subsequent to powder preparation, spark plasma sintering was utilized to achieve densification and control grain growth. The microstructural and optical characteristics of the samples were then analyzed using X-ray diffraction, field emission scanning electron microscopy and infrared spectroscopy.Results: The findings indicated that the incorporation of Si3N4 nanoparticles (0.1 wt%) and a dispersing agent (2 wt%) led to an enhancement in infrared transmittance, with a maximum achieved of 85% within the 5–6 µm wavelength range. This observation was corroborated by microscopic analysis, which confirmed a reduction in grain size and an improvement in microstructural uniformity. Furthermore, X-ray diffraction analysis substantiated the preservation of the crystalline structure of alumina across all samples.Conclusion: The optimization of the sintering process, in conjunction with the incorporation of silicon nitride nanoparticles, facilitates the fabrication of transparent alumina, which exhibits augmented optical properties. These materials hold considerable promise for applications in infrared-sensitive systems, including missile guidance and optical sensor technologies.