Heavy Metal Leachability Tendency of Ladle Furnace Steel Slags: Investigating Stable Slag Matrix for Construction Use
- 7 November 2026
- journal article
- Published by Wiley in Environmental Quality Management
- Vol. 36 (4)
Abstract
The leachability potential of ladle furnace steel slag (LFSS) is critical for assessing environmental compatibility and sustainability in construction applications. This study systematically investigates the leaching behavior of different LFSS types, focusing on the mobilization of environmentally sensitive heavy metals. Three LFSS variants such as Al‐killed, Al‐Si‐killed, and Si‐killed, produced from different steelmaking routes were examined using standardized protocols: the Toxicity Characteristic Leaching Procedure (TCLP), the Single Batch Test (SBT), and the Long‐Term Leaching Test (LTLT). Experimental variables included leaching medium pH, slag particle size, liquid‐to‐solid (L/S) ratio, and duration. Results reveal variations in leachate composition, specifically in release of the heavy metals that is, Cr, As, Cd, Hg, Pb, Mn, Fe, Co, Ni, Zn, Cu, and Mo. Findings indicate that metal mobilization depends on both slag chemistry and leaching environment acidity, with enhanced leaching under acidic conditions. A comparative analysis shows that Al‐Si‐killed LFSS has the lowest leaching potential, indicating more stable immobilization and precipitation of heavy metals. In contrast, Al‐killed and Si‐killed LFSS show higher leaching, particularly increased manganese release under acidic and alkaline conditions. However, concentrations of other heavy metals remain negligible and within regulatory limits. Long‐term leaching assessments confirm the environmental safety of the tested LFSS variants. Al‐Si killed LFSS found to exhibit lowest or negligible leaching of toxic trace metals particularly in TCLP test. This behavior is attributed to the formation of stable alumino‐silicate network and surface passivation layer which binds the metallic species within the matrix and reduces the mobility. The results support the safe and sustainable use of LFSS in construction. Incorporating suitable binders further reduces leachability by encapsulation and masking effects, enhancing performance.Keywords
This publication has 34 references indexed in Scilit:
- Alumina Recovery from Ladle Furnace Slag using Alkaline LeachingMining, Metallurgy & Exploration, 2025
- The Leaching Kinetics of Calcium and Iron Ions from Steel Slag and the Preparation of High-Purity Calcium Carbonate NanoparticlesJournal of Sustainable Metallurgy, 2025
- Utilization of ladle furnace slag and fly ash as partially replacement of cementCleaner Engineering and Technology, 2025
- Recent applications of steel slag in construction industryEnvironment, Development and Sustainability, 2023
- Treatment of ladle furnace slag by carbonation: Carbon dioxide sequestration, heavy metal immobilization, and strength enhancementChemosphere, 2022
- Physical, microstructure and leaching assessments for pavement road base containing mixed steel slag and cathode ray tube glassClean Technologies and Environmental Policy, 2021
- Leaching Characteristics of Iron and Manganese from Steel Slag with Repetitive Replenishment of LeachateKSCE Journal of Civil Engineering, 2019
- Hydration of dicalcium silicate and diffusion through neo-formed calcium-silicate-hydrates at weathered surfaces control the long-term leaching behaviour of basic oxygen furnace (BOF) steelmaking slagEnvironmental Science and Pollution Research, 2018
- Short-term leaching study of heavy metals from LD slag of important steel industries in Eastern IndiaJournal of Material Cycles and Waste Management, 2016
- Leaching Behavior of Aged Steel SlagsSteel Research International, 2013