Investigation of the Flow Behaviour of Martensitic Steel at Elevated Temperatures Via Uniaxial Tensile Tests
Open Access
- 25 June 2025
- journal article
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- p. 651-661
Abstract
In recent years, advanced high strength steels have been the main choice of automobile manufacturers due to their excellent strengths and decent formability. In this study, the forming behaviour of a martensitic steel (MART 1200) at elevated temperatures, where higher formability and an acceptable strength can be achieved, has been investigated. For this purpose, tensile test experiments have been conducted at room temperature, 175°C, 275°C, 375°C and 475°C in two different strain rates (0.005 s–1, 0.05 s–1). The flow behaviour, elongation capacity, strain rate sensitivity, strain hardening and strain hardening rate of MART1200 have been investigated and fracture surfaces and microstructures have been examined by scanning electron microscope. It has been shown that the strain rate sensitivity of MART1200 increases significantly after 275°C and, for the higher strain rate, a significant improvement up to 80% in the elongation capacity has been achieved in return for a 19% strength reduction at 375°C.Keywords
This publication has 31 references indexed in Scilit:
- Experimental, analytical and parametric evaluation of the springback behavior of MART1400 sheetsJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2022
- Superplasticity of high-entropy alloys: a reviewArchives of Civil and Mechanical Engineering, 2021
- Dynamic strain aging mechanisms in a metastable austenitic stainless steelActa Materialia, 2021
- A feasibility study on warm forming of an as-quenched 22MnB5 boron steelInternational Journal of Lightweight Materials and Manufacture, 2020
- Analysis of non-isothermal warm deep drawing of dual-phase DP600 steelInternational Journal of Material Forming, 2018
- Dynamic strain aging studied at the atomic scaleActa Materialia, 2015
- Evolution of microstructure and strength during the ultra-fast tempering of Fe–Mn–C martensitic steelsJournal of Materials Science, 2014
- Tempering of Martensite in Dual-Phase Steels and Its Effects on Softening BehaviorMetallurgical and Materials Transactions A, 2011
- Evolution of dislocation densities and the critical conditions for the Portevin-Le Châtelier effectActa Metallurgica et Materialia, 1990
- Void formation during tensile testing of dual phase steelsMetallurgical Transactions A, 1988