Reduction of Forward Bias Degradation in 4H-SiC PiN Diodes Fabricated on 4H-SiC Bonded Substrates
Open Access
- 6 June 2023
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 948, 107-113
Abstract
The advantage in reducing forward bias degradation of bipolar 4H-SiC devices using a 4H-SiC bonded substrate is demonstrated. To evaluate the differences in forward bias degradation between a 4H-SiC bonded substrate and a commercially available 4H-SiC bulk substrate, a forward current stress test and subsequent photoluminescence (PL) imaging of PiN diodes fabricated on both the substrates were performed. Unlike the bulk substrate, the bonded substrate maintained a low ΔVf and the variation among the measured diodes was extremely small even after applying the highest current density of 1500 A/cm2. The investigated number of bar-shaped SSFs within the electrically stressed diodes with more than 1000 A/cm2 revealed the possibility that the BPDs existing at deep positions below the epilayer/substrate interface were drastically reduced in the 4H-SiC bonded substrate.Keywords
This publication has 5 references indexed in Scilit:
- Defect engineering in SiC technology for high-voltage power devicesApplied Physics Express, 2020
- Relationship between depth of basal-plane dislocations and expanded stacking faults by application of forward current to 4H–SiC p-i-n diodesApplied Physics Express, 2019
- Glide of threading edge dislocations after basal plane dislocation conversion during 4H–SiC epitaxial growthJournal of Crystal Growth, 2015
- Conversion of basal plane dislocations to threading edge dislocations in 4H-SiC epilayers by high temperature annealingJournal of Applied Physics, 2012
- Degradation of hexagonal silicon-carbide-based bipolar devicesJournal of Applied Physics, 2006