Microstructure Evolution and Mechanical Properties of Dual-Phase AlCrFe2Ni2 High-Entropy Alloy Under High-Strain-Rate Compression
Open Access
Abstract
This paper investigates the effect of strain rate on the mechanical deformation and microstructural development of dual-phase AlCrFe2Ni2 high-entropy alloy during quasi-static and dynamic compression processes. It is revealed that the as-cast AlCrFe2Ni2 alloy is composed of a mixture of FCC, disordered BCC, and ordered B2 crystal structure phases. The alloy shows excellent compressive properties under quasi-static and dynamic deformation. The yield strength exceeds 600 MPa while the compressive strength is more than 3000 MPa at the compression rates of 30% under quasi-static conditions. Under dynamic compression conditions, the ultimate compression stresses are 1522 MPa, 1816 MPa, and 1925 MPa with compression strains about 12.8%, 14.7%, and 18.2% at strain rates of 1300 s−1, 1700 s−1 and 2100 s−1, respectively. The dynamic yield strength is approximately linear with strain rate within the specified range and exhibit great sensitivity. The strong localized deformation regions (i.e., adiabatic shear bands (ASBs)) appear in dynamically deformed samples by dynamic recrystallization due to the conflicting processes of strain rate hardening and heat softening.Keywords
Funding Information
- Natural Science Foundation of Guangdong Province (2022A0505050052, 2022A1515012591)
This publication has 43 references indexed in Scilit:
- Mechanical Properties and Microstructure of the CoCrFeMnNi High Entropy Alloy Under High Strain Rate CompressionJournal of Materials Engineering and Performance, 2016
- Effect of Strain Rate on Deformation Behavior of AlCoCrFeNi High-Entropy Alloy by NanoindentationJournal of Materials Engineering and Performance, 2016
- Bi-modal Structure of Copper via Room-Temperature Partial Recrystallization After Cryogenic Dynamic CompressionMetallurgical and Materials Transactions A, 2016
- Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy systemActa Materialia, 2014
- The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloyActa Materialia, 2013
- Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloysActa Materialia, 2012
- Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloysActa Materialia, 2011
- Decomposition in multi-component AlCoCrCuFeNi high-entropy alloyActa Materialia, 2011
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004
- Adiabatic shear band formation during dynamic torsional deformation of an HY-100 steelActa Metallurgica et Materialia, 1993