3D circuit model for 3D IC reliability study
Authors:
- 1 April 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Abstract
3D integrated circuit technology is an emerging technology for the near future, and has received tremendous attention in the semiconductor community. With the 3D integrated circuit, the temperature and thermo-mechanical stress in the various parts of the IC are highly dependent on the surrounding materials and their materials properties, including their thermal conductivities, thermal expansivities, Young modulus, Poisson ratio etc. Also, the architectural of the 3D IC will also affect the current density, temperature and thermo-mechanical stress distributions in the IC. In view of the above-mentioned, the electrical-thermal-mechanical modeling of integrated circuit can no longer be done with a simple 2D model. The distributions of the current density, temperature and stress are important in determining the reliability of an IC. In this work, we demonstrate a method of converting 2D circuit layout into a 3D model. Simulations under real circuit operating condition are carried out using both Cadence (a circuit simulator) and ANSYS (finite element tool). Limiting our study to the electromigration failure, we compute the current density, temperature and stress distributions of the interconnect layers by considering the heat transfer and Joule heating, and the ldquoweak spotrdquo for electromigration is identified. Layout design can be modified based on the simulation results so as to enhance the 3D circuit interconnect reliability.Keywords
This publication has 11 references indexed in Scilit:
- The Analysis of System-Level Timing Failures Due to Interconnect Reliability DegradationIEEE Transactions on Device and Materials Reliability, 2008
- Effects of width scaling and layout variation on dual damascene copper interconnect electromigrationMicroelectronics Reliability, 2007
- Electromigration in ULSI interconnectsMaterials Science and Engineering: R: Reports, 2007
- Dynamic simulation of electromigration in polycrystalline interconnect thin film using combined Monte Carlo algorithm and finite element modelingJournal of Applied Physics, 2007
- Submodeling Analysis for Path-Dependent Thermomechanical ProblemsJournal of Electronic Packaging, 2004
- The impact of technology scaling on lifetime reliability2004
- Temperature-dependent inelastic response of passivated copper films: Experiments, analyses, and implicationsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2003
- Three dimensional finite element determination of current density and temperature distributions in pillar vias2002
- Impact of test structure design on electromigration of metal interconnect1999
- Effect of VLSI interconnect layout on electromigration performance1998