Converter-Level Packaging and Optimization for a SiC-Based Grid-Interface Converter Using Discrete Devices
- 5 April 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 14 (12) , 2157-2176
Abstract
Grid-integration of renewables through power electronic Grid-Interface Converters (GICs) is essential for achieving a sustainable grid. This mission involves developing compact, efficient converters with standardized interfaces to minimize redundancy. In line with this objective, this paper presents an electro-mechanical-thermal design and packaging of a two-stage SiC-based 75 kVA GIC using TO-247 discrete devices with two times lower cost-to-power ratio than power modules. The power stage is 3-D packaged on a cylindrical-hole-based three-face utilized heat sink to achieve 5.5 kW/L power density, including passive components. For the DC-AC stage, Two-Level Split-Phase topology (2L-SP) is employed, owing to its lower switching loss and output d v /d t and increased cross-talk immunity compared with simple Two-Level (2L) topology. An equivalent switching transition circuit is derived for optimal sizing of split inductors in 2L-SP. Further, for device interconnection, an optimized PCB layout with flux cancellation and minimum board parasitic capacitance is developed for optimal device switching with minimum voltage overshoot. Moreover, for magnetics, split-direct winding technique is employed to achieve minimum winding capacitance. Lastly, the developed GIC is systematically tested at rated system voltage with an RL load at 10 kVA.Keywords
Funding Information
- Oak Ridge National Laboratory (4000180952)
- National Science Foundation (1846917)
This publication has 73 references indexed in Scilit:
- A Comprehensive Review of Power Converter Topologies and Control Methods for Electric Vehicle Fast Charging ApplicationsIEEE Access, 2022
- R DS(on) vs. inductance: comparison of SiC MOSFETs in 7pin D2Pak and 4pin TO‐247 and their benefits for high‐power MHz invertersIET Power Electronics, 2019
- Review of grid‐tied converter topologies used in photovoltaic systemsIET Renewable Power Generation, 2016
- Control and analysis of the high efficiency split phase PWM inverter2014
- High Frequency Effects in the Windings2013
- Selection of heatsink and fan for high-temperature power modules under weight constraintAPEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition, 2008
- Generalised steady-state analysis of multiphase interleaved boost converter with coupled inductorsIEE Proceedings - Electric Power Applications, 2005
- A study on stray capacitance modeling of inductors by using the finite element methodIEEE Transactions on Electromagnetic Compatibility, 2001
- Fundamentals of Power Electronics2001
- Rational approximation of frequency domain responses by vector fittingIEEE Transactions on Power Delivery, 1999