Real-Time Combustion Phase Detection Using Central Normalized Difference Pressure in CRDI Diesel Engines
- 11 June 2012
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 134 (8) , 082801
Abstract
To develop eco-friendly diesel engines, accurate combustion phase control is important due to its significant effects on harmful emissions and fuel efficiency. In order to accurately control the combustion phase, the detection of the combustion phase should precede control system design. Currently, combustion phase detection is done by the location of 50% mass fraction burned (MFB50), because of its close correlation with emissions and fuel efficiency. However, this method is not easily implemented in real-time applications because the calculation of MFB50 requires a large amount of in-cylinder pressure data and an excessive computational load. For this reason, a combustion phase indicator with a simple algorithm is required for real-time combustion control. In this study, we propose a new combustion phase indicator, called the “Central normalized difference pressures (CNDP).” The CNDP indicates the center of the two crank angles where the normalized difference pressure between firing pressure and motoring pressure (NDP) reaches 90% of the maximum value before peak (NDPbp90), and 70% of the maximum value after peak (NDPap70). The NDPbp90 and NDPap70 are highly correlated with MFB50 and the correlation is enhanced as the center between the two points obtained. The CNDP is represented by a fixed quadratic polynomial with MFB50 that robust to changes in various engine operating conditions such as engine speed, main injection timing, injected fuel quantity, fuel-rail pressure, exhaust gas recirculation (EGR) rate and boost pressure. Furthermore, in performance evaluation, the CNDP requires remarkably fewer in-cylinder pressure data samples, calculation steps and less computation time compared to MFB50. These results show great potential for the CNDP to be a substitute for the MFB50 since the proposed combustion phase detection algorithm can be used effectively for real-time combustion phase detection and control.Keywords
This publication has 22 references indexed in Scilit:
- A Statistical Approach to Spark Advance MappingJournal of Engineering for Gas Turbines and Power, 2010
- Premixed Low Temperature Combustion of Biodiesel and Blends in a High Speed Compression Ignition EngineSAE International Journal of Fuels and Lubricants, 2009
- Fast heat release characterization of a diesel engineInternational Journal of Thermal Sciences, 2008
- A study on pegging methods for noisy cylinder pressure signalControl Engineering Practice, 2008
- A method for combustion phasing control using cylinder pressure measurement in a CRDI diesel engineMechatronics, 2007
- Advantages of Diesel Engine Control Using In-Cylinder Pressure Information for Closed Loop ControlSAE International Journal of Advances and Current Practices in Mobility, 2003
- Cylinder Pressure-Based Spark Advance Control for SI Engines.JSME International Journal Series B, 2001
- Calculation of Heat Release in Direct Injection Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 1999
- The Calculation of Heat Release Energy from Engine Cylinder Pressure DataSAE International Journal of Advances and Current Practices in Mobility, 1998
- Engine Control Using Cylinder Pressure: Past, Present, and FutureJournal of Dynamic Systems, Measurement, and Control, 1993