Increasing energy efficiency and enabling the process of vacuum mode stabilization during the operation of milking equipment
Open Access
- 30 December 2022
- journal article
- research article
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (1 (120)) , 62-69
Abstract
A scientific hypothesis has been put forward, according to which an increase in the efficiency of using a vacuum system of milking equipment with an upper milk line with mechanical pulsators can be achieved by predicting its residual resource. As well as with the subsequent planning of maintenance and the identification of patterns and dependences characterizing these processes. As a result of experimental studies of changes in the technical and technological parameters of the vacuum system of milking equipment with an upper milk line with mechanical pulsators, the theoretical dependences obtained with their correlation coefficient r=0.971–0.972 were empirically confirmed. Namely, the magnitude of the working vacuum, the pulsation rate, the ratio of pulsations, and the tension force of the nipple rubber, depending on the time of operation. It was established that after 175 hours of operation of the milking stationary installation, the value of the working vacuum decreased by 4 %, the pulsation frequency – 14 %, the ratio of pulsations – 16 %, and the tension force of nipple rubber – 21 %. On the basis of the obtained dependences included in the procedure for forecasting the resource of the vacuum system of milk-milking equipment with an upper milk line with mechanical pulsators, the software package «Alt viewer 1.0» was developed. It is designed to display and automatically process the measurement results of the technical and technological parameters of milking equipment using the designed Tester of milking machines, v.2.0. The software performs the following main functions: reading the measurement results from the memory card, decoding them, displaying them in tabular and graphical forms. As well as the calculation of the parameters of pulsations and the formation of a report, forecasting the resource of the nodes of the vacuum system. The program also provides for the storage of information on the calibration coefficients of pressure sensors, air flow meter, as well as the frequency of polling sensors when measuring pulsations and fluctuations of the working vacuumKeywords
This publication has 23 references indexed in Scilit:
- Establishing the influence of technical and technological parameters of milking equipment on the efficiency of machine milkingEastern-European Journal of Enterprise Technologies, 2022
- Identifying changes in the technical parameters of milking rubber under industrial conditions to elucidate their effect on the milking processEastern-European Journal of Enterprise Technologies, 2021
- Relationship between dairy cows' hind leg activity and vacuum records during milkingAnimal, 2021
- Development of a device for cleansing cow udder teats and testing it under industrial conditionsEastern-European Journal of Enterprise Technologies, 2021
- Analysis of results from 21 years of milking system inspections in Japanese dairy farmsAnimal Science Journal, 2019
- Review: Milking machine settings, teat condition and milking efficiency in dairy cowsAnimal, 2019
- Milk-flow data collected routinely in an automatic milking system: an alternative to milking-time testing in the management of teat-end condition?Acta Veterinaria Scandinavica, 2018
- Impact of automatic milking systems on dairy cattle producers’ reports of milking labour management, milk production and milk qualityAnimal, 2018
- The statistical models of machinery milking duration by group milking machinesEastern-European Journal of Enterprise Technologies, 2014
- The statistical model of mechanical milking duration of farmyard milking installationEastern-European Journal of Enterprise Technologies, 2014