Effect of sintering temperature on microstructure and properties of MIM420 stainless steel
Authors:
- 24 November 2021
- journal article
- research article
- Published by SAGE Publications in Powder Metallurgy
- Vol. 65 (3) , 214-221
Abstract
This paper investigates the effect of different sintering temperatures on the microstructure and mechanical properties of 420 stainless steel prepared by metal injection molding (MIM). The results show that in the temperature range of 1300 to 1360, the internal structure of MIM420 stainless steel is mainly lath martensite and the fracture mode is quasi cleavage fracture. With the increase of sintering temperature, the relative density, strength and hardness of MIM420 stainless steel increase, and the carbon and oxygen content decreases, but the strength decreases when the sintering temperature exceeds 1340. When the sintering temperature reaches 1360, the sample will be slightly over sintered, so the appropriate sintering temperature is 1340. At 1340, the relative density, hardness, bending strength and ultimate tensile strength of the sample are 98.2 ± 0.4%, 54 ± 1HRC, 1229 ± 28 MPa and 1111 ± 26 MPa respectively.Keywords
This publication has 16 references indexed in Scilit:
- Ultra-high strength martensitic 420 stainless steel with high ductilityAdditive Manufacturing, 2019
- Effects of Nb and Mo on the microstructure and properties of 420 stainless steel processed by laser-powder bed fusionAdditive Manufacturing, 2019
- Microstructure-property relationships of 420 stainless steel fabricated by laser-powder bed fusionPowder Technology, 2019
- Analysis and Experimental Study on Closed-loop Stiffness of Hydraulic Servo SystemJournal of Mechanical Engineering, 2018
- Erosion and corrosion resistance of laser cladded AISI 420 stainless steel reinforced with VCApplied Surface Science, 2017
- Evaluation of micro-drilling technologies for metal-injection-molded 420 stainless steelMachining Science and Technology, 2016
- In situ heat treatment in selective laser melted martensitic AISI 420 stainless steelsMaterials & Design, 2015
- Effect of Austenitizing Heat Treatment on the Microstructure and Hardness of Martensitic Stainless Steel AISI 420Journal of Materials Engineering and Performance, 2011
- Martensitic stainless steel AISI 420—mechanical properties, creep and fracture toughnessMechanics of Time-Dependent Materials, 2011
- Sintering Behaviour and Performance Data of High Speed Steel ComponentsPowder Metallurgy, 1986