Evaluation of the Physical-Mechanical Properties of OSB Panels (Oriented Strand Board) With Different Types of Adhesives and Particle Orientations
Authors:
- Lygia Maria NapoliLNLygia Maria Napoli
- Luiz Henrique NatalliLuiz Henrique Natalli
- Ezaquel BednarczukEBEzaquel Bednarczuk
- Erick Chagas MustefagaEMErick Chagas Mustefaga
- Everton Lorenzett TavaresETEverton Lorenzett Tavares
- Andressa Vitoria Xavier BarbosaABAndressa Vitoria Xavier Barbosa
- Everton HilligEHEverton Hillig
Open Access
- 29 December 2023
- journal article
- research article
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (4) , e04513
Abstract
Objective: The present study aimed to evaluate the quality of OSB (Oriented Strand Board) panels produced with different particle orientations and adhesive formulations. Method: The panels were produced using strand particles of Pinus taeda, with a nominal density of 0.65 g/cm³ in two particle orientations (oriented and random) and three adhesive formulations (100% phenol formaldehyde, 100% tannin and 50% phenol formaldehyde + 50% tannin), distributed in six treatments. The tests were carried out according to the standards established by the EN 300 (2006) standards. Results and conclusion: The results showed that using the mixture of the phenol and tannin adhesive had better results for the swelling, water absorption properties and the static bending. It was not possible to determine the best type of adhesive to be used, as the results showed an equivalence between the two types of adhesives used, as well as the mixture between them. It was observed that the use of mixtures with 50% of each adhesive can be used in the production process of OSB panels, allowing new alternatives of adhesives for the industries. Research implications: This research investigates the possibility of using different types of natural adhesives in the manufacture of wooden panels, contributing to reducing the use of materials that are harmful to the environment and reducing costs in panel production, contributing to more sustainable production.Keywords
This publication has 19 references indexed in Scilit:
- CHAPAS AGLOMERADAS CONFECCIONADAS COM UREIA-FORMALDEÍDO SOB ADIÇÃO DE TANINO EM PÓCiência Florestal, 2017
- Development of sustainable bio-adhesives for engineered wood panels – A ReviewRSC Advances, 2017
- Propriedades mecânicas de painéis produzidos com lascas de madeira em três diferentes comprimentosScientia Forestalis, 2016
- Effect of Post-production Heat Treatment on Particleboard from Sugarcane BagasseMaterials Research, 2015
- Propriedades químicas de extratos tânicos da casca de Pinus oocarpa e avaliação de seu emprego como adesivoCERNE, 2014
- Produção de painéis aglomerados homogêneos e multicamadas de Melia azedarach (Cinamomo) e Pinus taeda com diferentes teores de resinaCERNE, 2012
- Qualidade de Compensados Fabricados com Adesivos à Base de Tanino-formaldeído de Pinus oocarpa e Fenol-formaldeídoFloresta e Ambiente, 2012
- Propriedades de chapas de aglomerado fabricadas com adesivo tânico de angico-vermelho (Anadenanthera peregrina) e uréia-formadeídoRevista Árvore, 2009
- Produção de chapas de partículas orientadas “OSB” de Eucalyptus grandis com diferentes teores de resina, parafina e composição em camadas.Ciência Florestal, 2005
- Adesivos à base de taninos das cascas de duas espécies de eucalipto para produção de chapas de flocosRevista Árvore, 2004