Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Luiz Henrique Natalli has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Potencial tecnológico da madeira de Pinus Taeda l. Modificada por pré-hidrólise

    by Everton Lorenzett Tavares, Ezaquel Bednarczuk, Éverton Hillig, Fabio Gomes Monteiro, Luiz Henrique Natalli, Gustavo Simão Rabelo, Alexandre Techy de Almeida Garrett, Ana Flávia Piskor da Silva

    O reflorestamento com Pinus taeda representa 19% das plantações comerciais no Brasil, sendo amplamente utilizado na indústria madeireira. Este estudo avaliou os efeitos da pré-hidrólise na madeira de P. taeda por meio de três tratamentos distintos: auto-hidrólise, organossolve e alcalino. As amostras foram submetidas a modificações químicas para analisar alterações nas propriedades físicas e mecânicas. Os resultados indicaram que o tratamento alcalino proporcionou os maiores valores de densidade e resistência, destacando-se estatisticamente dos demais. A umidade de equilíbrio higroscópico foi reduzida em todos os tratamentos, indicando maior estabilidade dimensional. O tratamento por auto-hidrólise apresentou os menores valores de dureza Janka, limitando sua aplicabilidade. Segundo a norma NBR 7190, os tratamentos foram classificados em diferentes classes de resistência, com destaque para o alcalino. Todos os tratamentos se enquadraram na classe C14 quanto à rigidez. Conclui-se que conhecer as propriedades modificadas da madeira é essencial para orientar seu uso adequado em aplicações estruturais, comerciais e industriais, promovendo maior eficiência e sustentabilidade.

  • Open Access

    Characterization of Biochar from Hovenia dulcis Thunb. and Mimosa scabrella Benth. Species from the Mixed Ombrophyllous Forest

    by Florian Empl, Miriam Schatzl, Sonja Kleucker, Alexandre Techy de Almeida Garrett, Fernando Augusto Ferraz, Luiz Henrique Natalli, Dimas Agostinho da Silva, Eduardo da Silva Lopes, Afonso Figueiredo Filho, Stefan Pelz

    The Mixed Ombrophyllous Forest (MOF), inserted in the Atlantic Forest biome, is of great ecological value, with deficient management strategies. In this context, sustainable management helps to promote the regeneration and growth of individual trees and control others, while maintaining the natural forest structure. This study therefore aimed to discuss opportunities and limitations of biochar, produced from two species from the MOF, which are currently only utilized to a limited extent in the study area in southern Brazil. A slow pyrolysis process at a lab scale was designed, biochar was produced, and key properties were analyzed from Hovenia dulcis Thunb. (chosen as an invasive species) and Mimosa scabrella Benth. (chosen as a native, fast-growing species), including branches and stems. The results showed that branches of Mimosa scabrella (BMS) had the highest biochar yield (30.32 ± 0.3%) and the highest electrical conductivity (415.08 ± 24.75 mS cm−1). Stems of Mimosa scabrella (SMS) showed the highest higher heating value (HHV—31.76 ± 0.01 MJ kg−1), lower heating value (LHV—31.03 ± 0.01 MJ kg−1), and energy yield (49.1%), while the branches of Hovenia dulcis (BHD) showed the lowest values. For the elemental analysis, SMS showed the best results, with the highest amount of fixed carbon (78.62 ± 0.22%) and carbon content (85.87 ± 0.083%), and consequently the lowest amount of ash (3.52 ± 0.08%). BHD showed a better water-holding capacity (303.26 ± 15.21%) and higher pH value (7.65 ± 0.14). The investigations conducted on the biochar from both species indicate a strong suitability of these woods for producing high-quality biochar.

  • Open Access

    Use of biochar as a component of substrates in horticulture and forestry: A review

    by Luiz Henrique Natalli, Everton Hillig, Kátia Cylene Lombardi, Marcelo Godinho, Remigio Paradelo Nuñez

    Plant production in nurseries, both in the forestry and horticultural sectors, has a large demand for substrates, making the use of natural resources such as peat high. The composition of substrates must not only have the necessary characteristics for good plant development, such as porosity, density, and water retention, but also look for sustainable and economical production. Biochar is a material derived from the processing of various organic residues which, due to its physical and chemical characteristics, presents great potential as a component of substrates for seedlings in nurseries. However, some issues still need to be resolved for this application, such as implementation costs, production process variables, feedstock origin and characterization, as well as the ideal proportions to be employed in formulations. To advance in these issues, we reviewed studies dealing with the different aspects of the use of biochar as a component of substrates. The literature suggests biochar can raise the quality of substrates, improve physical and chemical properties, contribute to waste management, and reduce production costs.


  • Open Access

    Evaluation of the Physical-Mechanical Properties of OSB Panels (Oriented Strand Board) With Different Types of Adhesives and Particle Orientations

    by Lygia Maria Napoli, Luiz Henrique Natalli, Ezaquel Bednarczuk, Erick Chagas Mustefaga, Everton Lorenzett Tavares, Andressa Vitoria Xavier Barbosa, Everton Hillig

    Objective: The present study aimed to evaluate the quality of OSB (Oriented Strand Board) panels produced with different particle orientations and adhesive formulations. Method: The panels were produced using strand particles of Pinus taeda, with a nominal density of 0.65 g/cm³ in two particle orientations (oriented and random) and three adhesive formulations (100% phenol formaldehyde, 100% tannin and 50% phenol formaldehyde + 50% tannin), distributed in six treatments. The tests were carried out according to the standards established by the EN 300 (2006) standards. Results and conclusion: The results showed that using the mixture of the phenol and tannin adhesive had better results for the swelling, water absorption properties and the static bending. It was not possible to determine the best type of adhesive to be used, as the results showed an equivalence between the two types of adhesives used, as well as the mixture between them. It was observed that the use of mixtures with 50% of each adhesive can be used in the production process of OSB panels, allowing new alternatives of adhesives for the industries. Research implications: This research investigates the possibility of using different types of natural adhesives in the manufacture of wooden panels, contributing to reducing the use of materials that are harmful to the environment and reducing costs in panel production, contributing to more sustainable production.


  • Open Access

    Generation and residues management in timber industries in the Midwest region of the state of Paraná

    by Luiz Henrique Natalli, Everton Hillig, Andressa Vitoria Xavier Barbosa, Erick Chagas Mustefaga, Everton Lorenzett Tavares, Ezaquel Bednarczuk

    The timber industries generate significant amounts of waste, throughout its production process, constituting an environmental aggravating, due to its inadequate final disposal and the lack of alternatives to use. This study aimed to diagnose the generation of solid waste and evaluate the management of these in the timber industries. Through the application of a questionnaire, a diagnosis was made of the main residues generated by sawmills, veneer and plywood industries in the regions of Guarapuava e Irati, Paraná, verifying the management of these residues and the environmental performance of the industries. An amount of 13 thousand m³/month of generated residues was diagnosed, with emphasis on “coastline”, “wood processing finishing residues (dust, wood shavings)”, “log core” and “plywood cutting”. Only 50% of industries separate the residues, 11 make use of this residues and 9 have environmental management systems. It can be concluded that the industries lack alternatives for destination and use.

  • Open Access

    PHYSICAL-MECHANICAL PROPERTIES OF MULTILAMINATED PLYWOOD PANELS PRODUCED WITH Cecropia hololeuca and Pinus elliottii.

    by Erick Chagas Mustefaga, Ezaquel Bednarczuk, Everton Lorenzett Tavares, Luiz Henrique Natalli, Rafaela Faber de Campos, Lucas Zappia Barcik, Éverton Hillig

    The work aimed to evaluate the physical and mechanical properties of plywood panels produced with Cecropia hololeuca and Pinus elliottii, in different compositions of blades, phenol-formaldehyde rhein was used, with a solids content of the beat of 35%, weight of 160 g/cm³ in a single line, in the pressing cycle a pressure of 12 kgf/cm² and a temperature of 140 °C for 10 min. Based on the recommendations of ABNT standards, physical-mechanical tests of apparent specific mass were performed; water absorption; swelling in thickness; swelling plus recovery in thickness; moisture content, static bending and shear in the glue line. The panels produced showed physical-mechanical properties in accordance with the parameters defined by ABIMCI and ABNT. Some results obtained significant differences, with emphasis on the panels with pine veneers and those combined with pine on the cover.

  • Open Access

    By-Products of the Timber Industries as Raw-Material for the Production of MDP (Medium Density Particleboard)

    by Luiz Henrique Natalli, Everton Hillig, Jeanette Beber de Souza, Carlos Magno de Sousa Vidal, Leopoldo Karman Saldanha