Ezaquel Bednarczuk
Research Subjects
Research Interests
Ezaquel Bednarczuk has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Éverton Hillig
UNICENTRO
7 shared publications - Erick Chagas Mustefaga
Universidade Estadual do Centro-Oeste
4 shared publications - Andressa Vitoria Xavier Barbosa3 shared publications
- Everton Lorenzett Tavares3 shared publications
- Luiz Henrique Natalli
Hochschule für Forstwirtschaft Rottenburg (HFR), University of Applied Forest Sciences Rottenburg, Schadenweiler Hof, 72108 Rottenburg, Germany
3 shared publications - Alexandre Techy de Almeida Garrett
Universidade Estadual do Centro-Oeste, Brazil
1 shared publication
Latest Publications
- Open Access
- 24 January 2025
- Published by Universidade Federal do Parana in FLORESTA
- Vol. 55 (1) , e94710
WOOD RESIDUES FROM AMAZON SPECIES FOR THE PRODUCTION OF PELLETS
O objetivo do trabalho foi produzir pellets a partir de resíduos de decks e pisos e avaliar sua qualidade por meio da norma ISO 17225-2. Foram utilizados resíduos de madeira das espécies Handroanthus serratifolius (Vahl) S. Grose (ipê amarelo), Hymenaea courbaril L. (jatobá), Manilkara elata Huber (maçaranduba), Dinizia excelsa Ducke (angelim-pedra), Astronium lecointei Ducke (muiracatiara) e Pinus taeda, espécie atualmente mais utilizada na produção de pellets no Brasil. A produção dos pellets foi realizada numa peletizadora laboratorial amandus kahl modelo 14-175. Os parâmetros avaliados foram: diâmetro, comprimento, teor de umidade, densidade unitária, densidade a granel, durabilidade mecânica, teor de finos, teor de voláteis e de carbono fixo, teor de cinzas, poder calorífico superior e inferior, densidade energética, resistência e rigidez à compressão (método adaptado) através da correlação de Pearson e a regressão linear. Os resultados obtidos para os 7 tipos de pellets produzidos atenderam os requisitos normativos para o uso residencial, comercial e industrial, destaque para a densidade a granel que ficou acima dos parâmetros influenciando de forma positiva na questão energética. Dentre as espécies, houve destaque na madeira do ipê amarelo, que apresentou valores de poder calorífico superior de 20.18 MG/kg, tal como o poder calorífico líquido de 17.17 MJ/kg e densidade energética de 13.93 GJ/m³.
- 24 January 2025
- Published by Universidade Federal do Parana in FLORESTA
- Vol. 55 (1) , e94710
Open AccessWOOD RESIDUES FROM AMAZON SPECIES FOR THE PRODUCTION OF PELLETS
O objetivo do trabalho foi produzir pellets a partir de resíduos de decks e pisos e avaliar sua qualidade por meio da norma ISO 17225-2. Foram utilizados resíduos de madeira das espécies Handroanthus serratifolius (Vahl) S. Grose (ipê amarelo), Hymenaea courbaril L. (jatobá), Manilkara elata Huber (maçaranduba), Dinizia excelsa Ducke (angelim-pedra), Astronium lecointei Ducke (muiracatiara) e Pinus taeda, espécie atualmente mais utilizada na produção de pellets no Brasil. A produção dos pellets foi realizada numa peletizadora laboratorial amandus kahl modelo 14-175. Os parâmetros avaliados foram: diâmetro, comprimento, teor de umidade, densidade unitária, densidade a granel, durabilidade mecânica, teor de finos, teor de voláteis e de carbono fixo, teor de cinzas, poder calorífico superior e inferior, densidade energética, resistência e rigidez à compressão (método adaptado) através da correlação de Pearson e a regressão linear. Os resultados obtidos para os 7 tipos de pellets produzidos atenderam os requisitos normativos para o uso residencial, comercial e industrial, destaque para a densidade a granel que ficou acima dos parâmetros influenciando de forma positiva na questão energética. Dentre as espécies, houve destaque na madeira do ipê amarelo, que apresentou valores de poder calorífico superior de 20.18 MG/kg, tal como o poder calorífico líquido de 17.17 MJ/kg e densidade energética de 13.93 GJ/m³.
- 30 September 2024
- Published by Sociedade de Investigacoes Florestais (SIF) in Revista Árvore
- Vol. 48 (1) , 1-11
Hybrid panels produced with particles and veneers of pine wood in different compositions
Hybrid wood panels can be produced with different particle or veneer sizes, forest species or even mixtures of synthetic materials, with the aim of reusing wood particles and generating new products. The present study aimed to verify the production process of hybrid panels formed with particles and veneers of Pinus taeda wood and urea‒formaldehyde resin. The panels were produced in four different compositions, with a nominal density of 0.65 g/cm³, and their quality was evaluated through their physical and mechanical properties. The addition of veneers in the traditional particleboard system increased the density of the hybrid panels and improved the mechanical properties. The properties of the MOR and MOE in static bending and screw withdrawal were favored using veneers on the panel faces. The internal bonding of the panels was not affected by their composition. The addition of veneers to the particleboard improved the dimensional stability of the panel.
- 30 September 2024
- Published by Sociedade de Investigacoes Florestais (SIF) in Revista Árvore
- Vol. 48 (1) , 1-11
Hybrid panels produced with particles and veneers of pine wood in different compositions
Hybrid wood panels can be produced with different particle or veneer sizes, forest species or even mixtures of synthetic materials, with the aim of reusing wood particles and generating new products. The present study aimed to verify the production process of hybrid panels formed with particles and veneers of Pinus taeda wood and urea‒formaldehyde resin. The panels were produced in four different compositions, with a nominal density of 0.65 g/cm³, and their quality was evaluated through their physical and mechanical properties. The addition of veneers in the traditional particleboard system increased the density of the hybrid panels and improved the mechanical properties. The properties of the MOR and MOE in static bending and screw withdrawal were favored using veneers on the panel faces. The internal bonding of the panels was not affected by their composition. The addition of veneers to the particleboard improved the dimensional stability of the panel.
- Open Access
- 3 January 2024
- Published by Universidade Federal do Parana in FLORESTA
- Vol. 54 (1)
PRODUCTION OF MDP PANELS WITH YERBA MATE HARVEST RESIDUES
The quality of MDP panels produced with Pinus taeda wood particles mixed with yerba mate harvest residues was evaluated. Monolayer panels were produced with the addition of 0. 20. 40. 60. 80 and 100% proportion of yerba mate waste, with a nominal specific gravity of 0.65 g.cm-³, using 12% urea-formaldehyde resin, 0.5% paraffin and 2% ammonium sulfate catalyst. The panels were pressed for 10 minutes at a temperature of 140°C and pressure of 40 kgf/cm². The physical properties of apparent density, moisture content, water absorption and thickness swelling (2 and 24 hours) were evaluated, as well as the mechanical properties of static bending (MOR and MOE), internal bonding, screw withdrawal on the face and Janka hardness. There was a trend towards an increase in internal bonding with an increase in the proportion of yerba mate residue in the panels, but the opposite occurred for the other mechanical properties studied. Some physical properties such as water absorption and thickness swelling resulted in better performance when yerba mate particles were added. In view of this, it can be concluded that it is possible to produce panels with the addition of yerba mate up to 40% in the composition with yerba mate particles, without affecting the quality of the properties.
- 3 January 2024
- Published by Universidade Federal do Parana in FLORESTA
- Vol. 54 (1)
Open AccessPRODUCTION OF MDP PANELS WITH YERBA MATE HARVEST RESIDUES
The quality of MDP panels produced with Pinus taeda wood particles mixed with yerba mate harvest residues was evaluated. Monolayer panels were produced with the addition of 0. 20. 40. 60. 80 and 100% proportion of yerba mate waste, with a nominal specific gravity of 0.65 g.cm-³, using 12% urea-formaldehyde resin, 0.5% paraffin and 2% ammonium sulfate catalyst. The panels were pressed for 10 minutes at a temperature of 140°C and pressure of 40 kgf/cm². The physical properties of apparent density, moisture content, water absorption and thickness swelling (2 and 24 hours) were evaluated, as well as the mechanical properties of static bending (MOR and MOE), internal bonding, screw withdrawal on the face and Janka hardness. There was a trend towards an increase in internal bonding with an increase in the proportion of yerba mate residue in the panels, but the opposite occurred for the other mechanical properties studied. Some physical properties such as water absorption and thickness swelling resulted in better performance when yerba mate particles were added. In view of this, it can be concluded that it is possible to produce panels with the addition of yerba mate up to 40% in the composition with yerba mate particles, without affecting the quality of the properties.
- Open Access
- 29 December 2023
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (4) , e04513
Evaluation of the Physical-Mechanical Properties of OSB Panels (Oriented Strand Board) With Different Types of Adhesives and Particle Orientations
Objective: The present study aimed to evaluate the quality of OSB (Oriented Strand Board) panels produced with different particle orientations and adhesive formulations. Method: The panels were produced using strand particles of Pinus taeda, with a nominal density of 0.65 g/cm³ in two particle orientations (oriented and random) and three adhesive formulations (100% phenol formaldehyde, 100% tannin and 50% phenol formaldehyde + 50% tannin), distributed in six treatments. The tests were carried out according to the standards established by the EN 300 (2006) standards. Results and conclusion: The results showed that using the mixture of the phenol and tannin adhesive had better results for the swelling, water absorption properties and the static bending. It was not possible to determine the best type of adhesive to be used, as the results showed an equivalence between the two types of adhesives used, as well as the mixture between them. It was observed that the use of mixtures with 50% of each adhesive can be used in the production process of OSB panels, allowing new alternatives of adhesives for the industries. Research implications: This research investigates the possibility of using different types of natural adhesives in the manufacture of wooden panels, contributing to reducing the use of materials that are harmful to the environment and reducing costs in panel production, contributing to more sustainable production.
- 29 December 2023
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (4) , e04513
Open AccessEvaluation of the Physical-Mechanical Properties of OSB Panels (Oriented Strand Board) With Different Types of Adhesives and Particle Orientations
Objective: The present study aimed to evaluate the quality of OSB (Oriented Strand Board) panels produced with different particle orientations and adhesive formulations. Method: The panels were produced using strand particles of Pinus taeda, with a nominal density of 0.65 g/cm³ in two particle orientations (oriented and random) and three adhesive formulations (100% phenol formaldehyde, 100% tannin and 50% phenol formaldehyde + 50% tannin), distributed in six treatments. The tests were carried out according to the standards established by the EN 300 (2006) standards. Results and conclusion: The results showed that using the mixture of the phenol and tannin adhesive had better results for the swelling, water absorption properties and the static bending. It was not possible to determine the best type of adhesive to be used, as the results showed an equivalence between the two types of adhesives used, as well as the mixture between them. It was observed that the use of mixtures with 50% of each adhesive can be used in the production process of OSB panels, allowing new alternatives of adhesives for the industries. Research implications: This research investigates the possibility of using different types of natural adhesives in the manufacture of wooden panels, contributing to reducing the use of materials that are harmful to the environment and reducing costs in panel production, contributing to more sustainable production.
- Open Access
- 31 July 2023
- Published by Brazilian Journals in REVISTA DELOS
- Vol. 16 (45) , 1707-1720
Generation and residues management in timber industries in the Midwest region of the state of Paraná
The timber industries generate significant amounts of waste, throughout its production process, constituting an environmental aggravating, due to its inadequate final disposal and the lack of alternatives to use. This study aimed to diagnose the generation of solid waste and evaluate the management of these in the timber industries. Through the application of a questionnaire, a diagnosis was made of the main residues generated by sawmills, veneer and plywood industries in the regions of Guarapuava e Irati, Paraná, verifying the management of these residues and the environmental performance of the industries. An amount of 13 thousand m³/month of generated residues was diagnosed, with emphasis on “coastline”, “wood processing finishing residues (dust, wood shavings)”, “log core” and “plywood cutting”. Only 50% of industries separate the residues, 11 make use of this residues and 9 have environmental management systems. It can be concluded that the industries lack alternatives for destination and use.
- 31 July 2023
- Published by Brazilian Journals in REVISTA DELOS
- Vol. 16 (45) , 1707-1720
Open AccessGeneration and residues management in timber industries in the Midwest region of the state of Paraná
The timber industries generate significant amounts of waste, throughout its production process, constituting an environmental aggravating, due to its inadequate final disposal and the lack of alternatives to use. This study aimed to diagnose the generation of solid waste and evaluate the management of these in the timber industries. Through the application of a questionnaire, a diagnosis was made of the main residues generated by sawmills, veneer and plywood industries in the regions of Guarapuava e Irati, Paraná, verifying the management of these residues and the environmental performance of the industries. An amount of 13 thousand m³/month of generated residues was diagnosed, with emphasis on “coastline”, “wood processing finishing residues (dust, wood shavings)”, “log core” and “plywood cutting”. Only 50% of industries separate the residues, 11 make use of this residues and 9 have environmental management systems. It can be concluded that the industries lack alternatives for destination and use.
- Open Access
- 7 March 2022
- Published by Atena Editora Edição de Livros Ltda in Journal of Engineering Research
- Vol. 2 (4) , 2-9
PHYSICAL-MECHANICAL PROPERTIES OF MULTILAMINATED PLYWOOD PANELS PRODUCED WITH Cecropia hololeuca and Pinus elliottii.
The work aimed to evaluate the physical and mechanical properties of plywood panels produced with Cecropia hololeuca and Pinus elliottii, in different compositions of blades, phenol-formaldehyde rhein was used, with a solids content of the beat of 35%, weight of 160 g/cm³ in a single line, in the pressing cycle a pressure of 12 kgf/cm² and a temperature of 140 °C for 10 min. Based on the recommendations of ABNT standards, physical-mechanical tests of apparent specific mass were performed; water absorption; swelling in thickness; swelling plus recovery in thickness; moisture content, static bending and shear in the glue line. The panels produced showed physical-mechanical properties in accordance with the parameters defined by ABIMCI and ABNT. Some results obtained significant differences, with emphasis on the panels with pine veneers and those combined with pine on the cover.
- 7 March 2022
- Published by Atena Editora Edição de Livros Ltda in Journal of Engineering Research
- Vol. 2 (4) , 2-9
Open AccessPHYSICAL-MECHANICAL PROPERTIES OF MULTILAMINATED PLYWOOD PANELS PRODUCED WITH Cecropia hololeuca and Pinus elliottii.
The work aimed to evaluate the physical and mechanical properties of plywood panels produced with Cecropia hololeuca and Pinus elliottii, in different compositions of blades, phenol-formaldehyde rhein was used, with a solids content of the beat of 35%, weight of 160 g/cm³ in a single line, in the pressing cycle a pressure of 12 kgf/cm² and a temperature of 140 °C for 10 min. Based on the recommendations of ABNT standards, physical-mechanical tests of apparent specific mass were performed; water absorption; swelling in thickness; swelling plus recovery in thickness; moisture content, static bending and shear in the glue line. The panels produced showed physical-mechanical properties in accordance with the parameters defined by ABIMCI and ABNT. Some results obtained significant differences, with emphasis on the panels with pine veneers and those combined with pine on the cover.