Enhanced performance of quantum cascade lasers through active region optimization and large optical cavity engineering
- 6 March 2026
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (5) , 9221-9237
Abstract
This paper presents a comprehensive study of mid-infrared quantum cascade lasers (QCLs) designed with optimized active region geometries and large optical cavity (LOC) structures to achieve enhanced performance. The devices were fabricated using molecular beam epitaxy (MBE) and characterized in terms of electro-optical, spectral, and far-field properties. The introduction of LOC architectures significantly reduced waveguide losses, improved optical confinement, and enhanced beam collimation. Devices with 50 active region stages and LOC design (QCL#3_LOC) exhibited the lowest waveguide losses (∼1.9 cm −1 ) and the narrowest vertical far-field divergence (FWHM = 27.1°), while maintaining stable emission around 5.3 µm. Compared to conventional designs, the optimized structures achieved nearly four times higher output power (up to 3 W) and a reduced threshold current density (∼2.5 kA/cm 2 ), with a wall-plug efficiency exceeding 4%. Spectral measurements revealed narrower electroluminescence linewidths and reduced current-induced redshift, confirming improved carrier uniformity and thermal management. These results demonstrate that combining active region optimization with LOC engineering provides a powerful route to increased performance and reliability of mid-infrared QCLs, making them promising candidates for high-power applications such as gas sensing, spectroscopy, and free-space optical communication.Keywords
Funding Information
- Narodowe Centrum Badań i Rozwoju (TECHMATSTRATEG-III/0026/2019-00)
- National Centre for Research and Development (FENG.01.01-IP.01-A0MR/24-00)
This publication has 19 references indexed in Scilit:
- Fabrication of optimized partial-reflection coatings for mid-infrared quantum cascade lasersApplied Physics B, 2024
- Temperature induced degradation mechanisms of AlInAs/InGaAs/InP quantum cascade lasersMaterials Research Express, 2018
- MBE growth of strain-compensated InGaAs/InAlAs/InP quantum cascade lasersJournal of Crystal Growth, 2017
- Mid-IR quantum cascade lasers: Device technology and non-equilibrium Green's function modeling of electro-optical characteristicsPhysica Status Solidi (b), 2014
- Investigation of thermal properties of mid-infrared AlGaAs/GaAs quantum cascade lasersJournal of Applied Physics, 2012
- Room temperature quantum cascade lasers with 27% wall plug efficiencyApplied Physics Letters, 2011
- Quantum cascade lasers in chemical physicsChemical Physics Letters, 2010
- Strain-compensated GaInAs/AlInAs/InP quantum cascade laser materialsJournal of Crystal Growth, 2009
- Large cavity quantum cascade lasers with InP interstacksApplied Physics Letters, 2008
- Dependence of the device performance on the number of stages in quantum-cascade lasersIEEE Journal of Selected Topics in Quantum Electronics, 1999